TIMKEN Bearing housings

Timken MSE series split housings are two-piece units designed to hold split cylindrical roller bearings. They are the practical choice when a shaft cannot be pulled out: you place the halves around the shaft and bolt them together, which cuts maintenance time on large machines. MR Industrial Accessories LLC supplies these housings from Miami to customers throughout the United States and Latin America, and can help you match the right size to your application.

Timken LSE series split brackets are mounted bearings with a housing and bearing that separate into two halves. This design lets you install or replace the unit directly on the shaft without taking apart the surrounding equipment, which is useful when access is tight and downtime is costly. Typical applications include conveyors, mills, and pumps.

Timken MSM series split bearing housings combine a cylindrical bearing with a housing that separates into two halves. This design lets you install or replace the bearing without pulling the shaft or uncoupling the drive. Maintenance teams choose them for conveyors, mills, pumps, and fans where access is limited and downtime matters. MR Industrial Accessories LLC supplies this line and can help you match the housing to your shaft and load conditions.

In a split plummer block housing, the SR lock ring keeps the bearing outer ring in its axial position. Seated in the housing bore, it stops the outer ring from shifting sideways, so the bearing stays where the design intends it to sit. Skip this part and the assembly loses its guidance, which shows up as uneven wear. MR Industrial Accessories LLC supplies the Timken SR line for SNT and FSNT housings.

The Timken 500/600 series housing seal closes the gap between the shaft and a split plummer block housing, keeping dust, water and chips out of the bearing raceway. It serves as a static seal in SNT and FSNT housings, fitting between the cover and the shaft. MR Industrial Accessories LLC supplies this line to plants and workshops across the United States and several Latin American countries.

The Timken LO series seal is a component that fits into 500/600 series split plummer block housings, which are also called SNT or FSNT. It keeps lubricant in and keeps dust, water and particles out, so the bearing is protected and lasts longer in tough conditions. MR Industrial Accessories supplies this line.