TIMKEN FSNT 212 split plummer block housing
- Brand
- TIMKEN
- Category
- Bearing housings
- Subcategory
- Bearing housings
- Series
- FSNT
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
TIMKEN FSNT 212 belongs to split plummer block housing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for FSNT 212 and any equivalents.
Timken FSNT housings are cast plummer blocks built in two halves, so a bearing can be fitted or pulled without taking the shaft out of the machine. That makes them a practical choice for long shafts and for equipment where access around the bearing is tight. MR Industrial Accessories supplies this line to maintenance and purchasing teams in the United States and Latin America, and helps match the housing to the bearing and the application.
Reading the code is the first step. FSNT is the series, and the digits that follow set the size: FSNT 211, FSNT 212 and FSNT 213 step up within one group, and FSNT 215 through FSNT 218 follow the same pattern. A code such as FSNT 511-609 carries two numbers because that housing takes more than one shaft or bearing diameter.
Typical duty covers conveyors, mills, mixers, pumps, fans and other process equipment in food, chemical, cement and steel operations. Where a shaft is long or a machine is hard to reach, the two-piece body pays off: the bearing can be checked or swapped without uncoupling the drive.
Selection comes down to three inputs: shaft diameter, bearing type (deep groove, self-aligning or roller) and the load the housing will carry. During mounting, both halves must seat squarely on the base and the joining bolts must be tightened to the recommended torque. Lubrication and sealing protect against dust and moisture, and shaft alignment should be checked before the final tightening.
Timken FSNT housings interchange with other brands built to the same mounting standard, including SKF SNL and equivalents. What governs the swap is the housing and bearing dimensions, not the part number alone. Replacing an existing unit? Send a photo or the number stamped on the part and we will identify the compatible option.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does FSNT indicate on a Timken housing?
- It is the series name for Timken split plummer block housings. The letters denote the housing type and the number after them denotes the size, so FSNT 211 and FSNT 212 are two sizes in the same family.
- Which data do you need to pick the correct FSNT housing?
- Shaft diameter, bearing type and load. With those three we can point you to the right FSNT part number. If a housing is already mounted, the stamped number or a photo is enough for us to work from.
- Can an FSNT housing replace another brand?
- Often yes, when the other brand follows the same mounting standard, SKF SNL being one example. The deciding factors are the housing and bearing dimensions. Send the part number and we will confirm the alternative.