Shaft seal 110 x 130 x 13 mm: SKF and DBH part numbers
The MR catalog lists 7 radial shaft seals sized 110 x 130 x 13 mm (shaft d x housing bore D x width h), from 2 brands: SKF (1) and DBH (6). Each part number in the table links to its product page, so you can request a quote via WhatsApp or email. If you are looking for a 110x130x13 oil seal, these are the ones: for a 110 mm shaft, a 130 mm housing bore and a width of 13 mm.
110 x 130 x 13 mm shaft seals
The designs and profiles shown in the part numbers, written as each brand writes them, with the number of part numbers: Mx (3), Lx (2), HMSA10 (1), and Lx-R (1).
Sizes are in millimetres: d is the diameter of the shaft the lip runs on, D the diameter of the housing bore the seal is fitted into and h its width.
Two seals with the same size are not necessarily the same seal: the lip design, the dust lip, the spring, the materials and the operating conditions they accept depend on the design and the brand. That is why we quote by part number: send us the part number shown on the seal, the box or the drawing, or the size together with the design and material you need.
If the part number can no longer be read, measure the shaft, the housing bore and the width of the old seal, and look the size up in the seals-by-size index: each size with a page lists all its part numbers.
Looking for a 110 x 130 x 13 mm shaft seal?
Tell us the complete part number, or the size plus the design and material you need, and the quantity. We'll send a quote by WhatsApp or email.