V-belt Stark XPA 957
- Brand
- STARK
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- XPA
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and STARK: matching part numbers →OPTIBELT and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
STARK XPA 957 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for XPA 957 and any equivalents.
The Stark XPA 957 is a cogged narrow V-belt in the XPA profile. Cogged narrow V-belts are used on compact, high-speed industrial drives where a standard wrapped belt runs hot or slips. This belt suits maintenance and purchasing teams replacing a worn belt on a fixed-center or short-center drive.
Confirm fit by reading the marking on the back of the old belt. The profile and the length are the two values that matter here: this belt is XPA profile, and it is listed as XPA 957. If the old belt is too worn to read, measure the outside length and the top width, then send those figures with a photo of the drive and the pulley grooves.
The same size is also listed under Optibelt as XPA 957. If your drive runs more than one belt, replace the full set at the same time so the load stays evenly shared across the grooves. Check the pulleys for worn grooves, oil or debris before the new belt goes on, and set tension to the drive manufacturer's specification.
To request a quote, send the part number XPA 957, the quantity, and a photo of the belt marking or the drive nameplate by WhatsApp or email. We carry the Stark XPA 957 and can confirm the belt or suggest an equivalent from what we supply.
Dimensions
- Section
- XPA
Frequently asked questions
- How do I confirm that the Stark XPA 957 is the right belt for my drive?
- Check the marking on the back of the belt you are replacing. The profile should read XPA and the length should match 957. If the marking is unreadable, send a photo of the drive and the pulley grooves, plus the measured outside length and top width, and we will confirm.
- Can I replace just one belt on a multi-belt drive?
- Replace the full set at the same time. Mixing a new belt with worn belts on the same drive leaves the new belt carrying more than its share of the load.
- What should I send with my quote request?
- Send the part number XPA 957, the quantity you need, and a photo of the belt marking or the drive nameplate. We reply by WhatsApp or email and can help confirm the right belt or suggest an equivalent.