V-belt Stark XPA 1060
- Brand
- STARK
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- XPA
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and STARK: matching part numbers →OPTIBELT and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
STARK XPA 1060 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for XPA 1060 and any equivalents.
The Stark XPA 1060 is a cogged narrow V-belt in the XPA profile with a length of 1060 mm. Before fitting it, inspect the drive and sheaves so the new belt runs correctly and lasts. The same size is also listed under Optibelt XPA 1060.
Start by locking out the drive. Check sheave grooves for wear, rust, burrs, or embedded debris. Worn grooves let a new belt sit too deep, which causes slip and heat. Clean the grooves and confirm the sheaves are aligned with a straightedge. Misalignment is a common cause of short belt life.
Check the bearings and shafts for play, noise, or rough turning. Look for oil or grease leaks that can reach the belt. Confirm the tensioner moves freely and the guard is secure. If the old belt failed early, find the cause before fitting the Stark XPA 1060.
When you request a quote, send the part number Stark XPA 1060 and the quantity. If you are matching an old belt, send the full marking from the back of the belt. The team can confirm the XPA profile and 1060 mm length or suggest an equivalent.
Dimensions
- Section
- XPA
Frequently asked questions
- What should I check on the drive before installing this belt?
- Inspect sheave grooves for wear, rust, or debris. Check alignment with a straightedge. Confirm bearings and shafts turn freely without play. Look for oil or grease leaks and make sure the tensioner and guard are in good condition.
- How do I confirm the Stark XPA 1060 is the right belt?
- Check the profile and length: XPA and 1060 mm. The same size is also listed under Optibelt XPA 1060. For a positive match, compare the full marking on the back of your old belt.
- What information do you need for a quote?
- Send the part number Stark XPA 1060 and the quantity you need. If you are replacing an unmarked belt, include the profile and length from the old belt or a photo of the drive.