V-belt Stark SPZ 2360
- Brand
- STARK
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and STARK: matching part numbers →MITSUBOSHI and STARK: matching part numbers →OPTIBELT and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
STARK SPZ 2360 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 2360 and any equivalents.
The Stark SPZ 2360 is a narrow wedge V-belt with an SPZ profile, a 9.7 mm top width, an 8 mm height and a 40-degree angle. Before you fit it, inspect the drive and sheaves so the new belt starts on a sound system.
Check sheave grooves for wear, burrs, oil or debris, and confirm the sheaves are aligned and secure. A worn or misaligned groove can shorten belt life and cause noise or slip, so correct any fault before the belt is fitted. The same size is also listed under Mitsuboshi SPZ 2360 and Optibelt SPZ 2360.
Confirm the SPZ profile and the belt length against your drive before ordering. The Stark SPZ 2360 follows the SPZ profile with a 9.7 mm top width, 8 mm height and 40-degree angle. If you are replacing a belt on a multi-belt drive, fit a full set so the load is shared evenly.
Send the part number SPZ 2360, the quantity and the drive details by WhatsApp or email to request a quote. If you need help confirming the right belt or a suitable equivalent, include the old belt marking and the sheave information.
Dimensions
- Section
- SPZ
Frequently asked questions
- What should I check on the drive before fitting a Stark SPZ 2360?
- Inspect the sheaves for groove wear, burrs, oil or debris, and verify alignment and tightness. Correct any issue before fitting the belt so the new belt runs correctly.
- How do I confirm the Stark SPZ 2360 is the correct belt?
- Check the old belt marking for the SPZ profile and the length, and compare it with the Stark SPZ 2360. If you are unsure, send the drive details and we can help confirm it.
- What information do I need to send for a quote?
- Send the part number SPZ 2360, the quantity required and any drive details or old belt marking. We reply promptly by WhatsApp or email.