V-belt Stark SPZ 2240
- Brand
- STARK
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and STARK: matching part numbers →MITSUBOSHI and STARK: matching part numbers →OPTIBELT and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
STARK SPZ 2240 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 2240 and any equivalents.
The Stark SPZ 2240 is a narrow wedge V-belt with an SPZ profile, a 9.7 mm top width and an 8 mm height. It runs at a 40 degree angle. The easiest way to confirm this is the belt you need is to read the marking on the back of the old belt and match it to the part number.
Markings on a worn belt can be faint, so clean the back of the belt and read it in good light before ordering. Look for the profile and the length together, since an SPZ belt of a different length will not fit the same drive. If the marking is worn away, measure the top width and height of the belt and compare them with the 9.7 mm and 8 mm dimensions above.
The same size is also listed under Mitsuboshi SPZ 2240 and Optibelt SPZ 2240, so those markings may appear on a belt already fitted to your drive. Send us the part number from the old belt, or a photo of the marking, and we will confirm the Stark SPZ 2240 against it. If the drive uses more than one belt, note how many are on the set so the replacement can be handled together.
Dimensions
- Section
- SPZ
Frequently asked questions
- How do I confirm the Stark SPZ 2240 is the belt I need?
- Read the marking on the back of the old belt. Match the profile and the length to SPZ 2240. If the marking is unreadable, measure the top width and height and compare them with 9.7 mm and 8 mm.
- The old belt is marked with another brand. Will the Stark SPZ 2240 fit?
- The same size is also listed under Mitsuboshi SPZ 2240 and Optibelt SPZ 2240. Send us the marking from your old belt and we will confirm the match.
- What should I send to request a quote?
- Send the part number SPZ 2240, the brand marking from the old belt if you have it, and the quantity you need. A photo of the back of the belt helps us confirm the profile and length.