V-belt Stark SPB 7400
- Brand
- STARK
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPB
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
STARK SPB 7400 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPB 7400 and any equivalents.
The Stark SPB 7400 is a narrow wedge V-belt for drives that use the SPB profile. To match it to the belt being replaced, confirm the profile and the length, then compare the cross-section dimensions before ordering.
The belt has an SPB profile with a 16.3 mm top width, a 13 mm height and a 40° angle. These are the numbers to check against the belt on the drive. If the old belt is worn or the marking is no longer readable, measure the top width and height with a caliper and compare them to the values above.
Length is the other point to confirm. The SPB 7400 is identified by its part number, so read the marking on the back of the old belt and send that number if it is legible. If the marking has worn off, the profile and the measured dimensions are what the team needs to help confirm the right belt or suggest an equivalent.
Send the part number, the profile and the measured top width and height by WhatsApp or email to request a quote. If the drive runs more than one belt, list every belt position so the set can be reviewed together.
Dimensions
- Section
- SPB
Frequently asked questions
- How do I match the Stark SPB 7400 to the belt I am replacing?
- Confirm the SPB profile and compare the cross-section: 16.3 mm top width, 13 mm height and 40° angle. Read the part number on the back of the old belt if it is still legible.
- What measurements should I send with my quote request?
- Send the part number, the profile and the measured top width and height. If the drive uses more than one belt, include the position of each belt so the set can be reviewed.
- What if the marking on the old belt is worn off?
- Measure the top width and height and note the profile. The team can use those dimensions to help confirm the right belt or suggest an equivalent.