V-belt Stark SPB 6300
- Brand
- STARK
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPB
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and STARK: matching part numbers →OPTIBELT and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
STARK SPB 6300 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPB 6300 and any equivalents.
This Stark SPB 6300 is a narrow wedge V-belt with an SPB profile and a 6300 mm length. To match the belt being replaced, confirm the profile and length from the marking on the old belt. The same size is also listed under Optibelt SPB 6300.
Start by reading the old belt. Look for SPB and 6300 on the back, or measure the top width and height: 16.3 mm across the top and 13 mm high, with a 40° angle. These dimensions identify the belt as an SPB profile, and the length is 6300 mm. If the marking is worn, measure the outside length and check the cross-section before ordering.
The SPB profile is a narrow wedge V-belt, often used where a standard V-belt would be wider and heavier for the same power. When you replace it, inspect the sheaves for wear, alignment and debris, and check that the belt sits correctly in the groove. If the drive uses multiple belts, replace them as a set so the load is shared evenly.
For a quote, send the part number SPB 6300 and the quantity you need. If you are unsure, include the old belt's marking, the top width and height, and the length. We carry the Stark SPB 6300 and can help confirm it is the right belt for your drive.
Dimensions
- Section
- SPB
Frequently asked questions
- How do I confirm this is the correct replacement belt?
- Check the old belt for SPB and 6300, or measure the top width (16.3 mm), height (13 mm) and length (6300 mm). The angle is 40°. If those match, the Stark SPB 6300 is the correct profile and length.
- Is the same size listed under another brand?
- Yes. The same size is also listed under Optibelt SPB 6300.
- What should I send to request a quote?
- Send the part number SPB 6300 and the quantity. If you are replacing a belt and want us to confirm, include the marking on the old belt and the measured top width, height and length.