V-belt Stark SPB 1320
- Brand
- STARK
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPB
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and STARK: matching part numbers →MITSUBOSHI and STARK: matching part numbers →OPTIBELT and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
STARK SPB 1320 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPB 1320 and any equivalents.
The Stark SPB 1320 is a narrow wedge V-belt in the SPB profile, with a 16.3 mm top width, 13 mm height and a 40° angle. Before you fit it, inspect the drive and sheaves so the new belt runs true from the start. We supply this belt to maintenance, engineering and purchasing teams across the United States, Canada, Mexico and South America.
A new belt will not correct a worn drive. Check the sheave grooves for wear, scoring or a polished surface, and confirm the grooves match the SPB profile. Misaligned sheaves and worn grooves can shorten belt life and cause vibration. If the sheaves are badly worn, replacing the belt alone may not restore the drive.
On multi-belt drives, fit belts as a matched set rather than mixing a new belt with used ones. Used belts have already stretched, so a mixed set can leave the new belt carrying more than its share of the load. Confirm the SPB profile and the length you need from the old belt's back marking before ordering.
The same size is also listed under Mitsuboshi SPB 1320 and Optibelt SPB 1320. To request a quote, send the part number and the quantity you need by WhatsApp or email, and our team will reply promptly.
Dimensions
- Section
- SPB
Frequently asked questions
- How do I confirm this is the correct belt for my drive?
- Read the marking on the back of the old belt and compare the profile and length. This belt is SPB profile with a 16.3 mm top width, 13 mm height and a 40° angle. If you are unsure, send the old marking and a photo of the drive to our team.
- Should I replace all belts on the drive at once?
- On a multi-belt drive, yes. Fitting a set avoids mixing a new belt with stretched used belts, which can overload the new belt. Check the sheaves for wear and alignment before fitting the set.
- What should I send to get a quote?
- Send the part number SPB 1320 and the quantity you need by WhatsApp or email. Our team will reply promptly and can help confirm the right belt or suggest an equivalent.