V-belt Optibelt SPB 1320
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPB
- Series
- SK metric profile V-belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and OPTIBELT: matching part numbers →OPTIBELT and STARK: matching part numbers →MITSUBOSHI and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT SPB 1320 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPB 1320 and any equivalents.
The Optibelt SPB 1320 is a narrow wedge V-belt in the SK metric profile series. It has an SPB profile, a 1320 mm length, a 16.3 mm top width, a 13 mm height and a 40 degree angle. Before fitting it, check the drive and sheaves so the new belt seats and wears correctly.
Inspect sheave grooves for wear, scoring, rust or embedded debris. Worn or damaged grooves can prevent the belt from seating properly and shorten its life. Verify that the sheaves are aligned and that the correct SPB profile is being used. Confirm the 1320 mm length matches the drive before installation.
Check the condition of the old belt as a reference. Look for cracks, missing ribs, glazing, uneven wear or separation. These signs often point to sheave problems or misalignment that should be corrected before fitting the new belt. If the drive uses multiple belts, replace them as a set to keep load sharing even.
The same size is also listed under Stark SPB 1320 and Mitsuboshi SPB 1320. To request a quote, send the part number Optibelt SPB 1320 by WhatsApp or email. Our team replies promptly and can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- SPB
- Length
- 1320mm
Frequently asked questions
- What should I check on the drive before fitting this belt?
- Inspect sheave grooves for wear, scoring, rust or debris, verify alignment, and confirm the SPB profile and 1320 mm length match the drive. Correct any issues before installation.
- Can I replace just one belt in a multi-belt drive?
- For drives using multiple belts, replace them as a set so load is shared evenly and the new belt does not take more than its share.
- How do I request a quote for the Optibelt SPB 1320?
- Send the part number Optibelt SPB 1320 by WhatsApp or email. Our team replies promptly and can help confirm the right belt or suggest an equivalent.