V-belt Stark C 75
- Brand
- STARK
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and STARK: matching part numbers →OPTIBELT and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
STARK C 75 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for C 75 and any equivalents.
The Stark C 75 is a classical V-belt built to the C profile. The marking tells you the section and the length, so you can check it against the belt you are replacing before you order.
The C section is the widest of the three common classical profiles, and this belt measures 22 mm across the top and 14 mm high, with a 40 degree angle on the sides. Those dimensions set how the belt sits in the sheave groove. If the belt rides too high or bottoms out, the drive will not pull correctly, so it is worth checking the groove as well as the belt.
The 75 in the part number gives the length, which is the other half of the match. A belt of the same section but a different length will not tension properly. Read the marking on the back of the old belt and compare it with the sheave groove and the drive layout before you specify a replacement.
The same size is also listed under Optibelt as C 75. Send us the part number, the marking from the old belt, or a photo of it, and we will confirm the belt or suggest an equivalent.
Dimensions
- Section
- C
Frequently asked questions
- How do I confirm this is the right belt?
- Check the section and the length against the old belt. This is a C profile belt with a 22 mm top width, 14 mm height and 40 degree angle. If the marking matches, the belt will fit the same groove.
- Can I replace a C section belt with a different length?
- No. The section and the length both have to match. A C belt of another length will not tension correctly on the same drive.
- What should I send for a quote?
- Send the part number C 75, or the marking from the back of the old belt, along with the quantity you need. A photo of the belt and the sheave helps us confirm the match.