V-belt Optibelt C 75
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- VB
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and OPTIBELT: matching part numbers →OPTIBELT and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT C 75 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for C 75 and any equivalents.
The Optibelt C 75 is a classical V-belt with a C profile and a length of 2007 mm. Before you fit it, inspect the drive and sheaves so the new belt runs correctly.
Check the sheave grooves for wear, rust or debris. Worn grooves can let a new belt sit too deep, causing slip and heat. Measure the groove width and compare it with the belt's 22 mm top width and 14 mm height. Confirm the groove angle matches the belt's 40° angle. If the sheaves are worn beyond specification, replace them before installing the belt.
Align the sheaves and check the shaft for movement. Misalignment or worn bearings will shorten belt life. Clean the grooves and make sure no old belt material remains. When you fit the Optibelt C 75, tension it according to your drive requirements. After the first run-in period, recheck tension and adjust as needed.
The same size is also listed under Stark C 75. To request a quote, send the part number, the quantity you need and any drive details you have. Our team replies promptly and can help confirm the right belt for your application.
Dimensions
- Section
- C
- Length
- 2007mm
Frequently asked questions
- What should I check on the drive before fitting this belt?
- Inspect sheave grooves for wear, rust or debris. Verify that the groove width and angle suit the belt's 22 mm top width, 14 mm height and 40° angle. Also check alignment and bearings.
- How do I request a quote for the Optibelt C 75?
- Send the part number C 75, the quantity you need and any drive details by WhatsApp or email. Our team replies promptly and can help confirm the right belt.
- Is the same size listed under another brand?
- Yes, the same size is also listed under Stark C 75.