V-belt Stark A 49
- Brand
- STARK
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
DODGE and STARK: matching part numbers →GATES and STARK: matching part numbers →OPTIBELT and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
STARK A 49 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for A 49 and any equivalents.
The Stark A 49 is a classical V-belt in the A profile, with a 13 mm top width, 8 mm height and a 40 degree angle. When a drive is down, the marking on the back of the old belt is often the fastest way to identify what to replace it with.
Read the marking before you order. The back of a worn belt usually carries the profile and the length designation, and on this belt that reads A 49. Matching the profile and the length designation on the old belt to the new one keeps the replacement on the same drive, whether the belt is being changed on its own or as part of a set.
The A profile is a classical V-belt section, and this one measures 13 mm across the top and 8 mm in height, with a 40 degree angle. If the marking is worn off or unreadable, measure the old belt and send the profile, the length designation and a photo of the drive. We will confirm the A 49 or point you to the closest match.
The same size is also listed under Optibelt A 49. We carry the Stark A 49, and quotes are handled by part number over WhatsApp or email.
Dimensions
- Section
- A
Frequently asked questions
- How do I identify this belt if the marking is gone?
- Measure the top width and height of the old belt and compare them to the A profile dimensions: 13 mm top width and 8 mm height, with a 40 degree angle. Send those measurements with a photo of the drive and we will confirm the A 49.
- What does the marking on the back of the belt tell me?
- It carries the profile and the length designation, which on this belt is A 49. That marking is the quickest way to match the old belt to the replacement.
- What should I send for a quote?
- Send the part number A 49, or the profile and length designation from the old belt, along with the quantity you need. If the marking is unreadable, send the measured dimensions and a photo of the drive.