V-belt Optibelt A 49
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- VB / HVAC Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
DODGE and OPTIBELT: matching part numbers →GATES and OPTIBELT: matching part numbers →OPTIBELT and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT A 49 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for A 49 and any equivalents.
The Optibelt A 49 is a classical V-belt with an A profile and a length of 1295 mm. Before fitting it, inspect the drive and sheaves so the new belt runs correctly.
Check sheave grooves for wear, rust, or embedded debris. Worn grooves can cause the belt to sit too deep, leading to slip and premature failure. Verify that the sheaves are aligned and that the drive turns freely by hand.
Confirm the belt marking on the old part: profile A, length 1295 mm, top width 13 mm, height 8 mm, and 40-degree angle. The same size is also listed under Stark A 49. If the old belt is stretched or damaged, use the marking rather than measured length to select the replacement.
For a quote, send the part number A 49 and the quantity you need. If you are unsure whether this is the correct belt for your drive, include photos of the sheaves and the old belt marking. The team can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- A
- Length
- 1295mm
Frequently asked questions
- What should I check on the drive before installing an Optibelt A 49?
- Inspect sheave grooves for wear, rust, or debris, and check alignment. Ensure the drive rotates freely and that no components interfere with the belt path.
- How do I identify the correct replacement belt?
- Look for the marking on the back of the old belt. This Optibelt A 49 has an A profile and a length of 1295 mm. The same size is also listed under Stark A 49.
- What information do I need to send for a quote?
- Send the part number A 49 and the quantity required. If you need help confirming the right belt, include photos of the old belt marking and the sheaves.