Timing belt Stark 880-8M-10
- Brand
- STARK
- Category
- Power transmission
- Subcategory
- Timing belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
STARK 880-8M-10 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 880-8M-10 and any equivalents.
The Stark 880-8M-10 is a timing belt with an HTD 8M profile and an 8 mm pitch. This page covers how to match it to the belt you are replacing.
Start with the marking on the back of the old belt. The replacement must carry the same part number, 880-8M-10, and the same profile, HTD 8M. The 8 mm pitch and the profile together define how the teeth seat in the pulleys, so both need to match what came off the drive.
If the marking is worn or unreadable, measure the belt and count the teeth. Then send the part number, 880-8M-10, or the profile and pitch, HTD 8M and 8 mm, to our team by WhatsApp or email. We carry the Stark 880-8M-10 and can confirm it against your drive.
Inspect the pulleys while the belt is off. Worn pulley grooves or a misaligned drive will shorten the life of any timing belt, including this one. Replace the belt and correct any pulley or alignment issue before the drive goes back into service.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
Frequently asked questions
- How do I confirm the Stark 880-8M-10 is the right belt?
- Read the part number on the back of the belt you are replacing. If it reads 880-8M-10, this is the same belt. If the marking is gone, send the profile HTD 8M and the 8 mm pitch to our team and we will confirm.
- What should I send for a quote?
- Send the part number 880-8M-10, or the profile and pitch, by WhatsApp or email. If you have the old belt, a photo of the back marking helps us confirm the match.
- Should I check anything else when replacing this belt?
- Inspect the pulleys for wear and check the drive alignment. A worn or misaligned drive will reduce the service life of the new belt.