Timing belt Stark 850-H-100
- Brand
- STARK
- Category
- Power transmission
- Subcategory
- Timing belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
STARK 850-H-100 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 850-H-100 and any equivalents.
The Stark 850-H-100 is a timing belt in the H profile. Before you fit it, inspect the drive so the new belt is not damaged by a worn sheave or a misaligned shaft.
Start at the sprockets and the shafts they sit on. Look for worn or hooked teeth, burrs, corrosion and any build-up in the tooth spaces. Check that the shafts turn freely, that the bearings are sound and that the two sprockets are aligned with each other. A belt that runs against a damaged sprocket will not last.
Then look at the rest of the drive. Confirm the belt path is clear, that guards and idlers are in good condition and that nothing rubs the belt in service. Set the tension to the drive maker's figure and recheck it after the first run-in period.
The same size is also listed under Mitsuboshi 850-H-100. Send the belt marking, the profile and the length you need, along with the quantity, and our team will confirm the belt or suggest an equivalent.
Dimensions
- Profile
- H
Frequently asked questions
- How do I confirm this belt matches the one I am replacing?
- Read the marking on the back of the old belt and compare it with the Stark 850-H-100. The profile is H and the belt is a timing belt. Send us the marking and the drive details and we will check it.
- What should I inspect before fitting the belt?
- Check the sprockets for worn teeth, burrs and build-up, confirm the shafts turn freely and are aligned, and make sure the belt path is clear. Replace anything that would damage a new belt.
- What do you need to quote this belt?
- Send the part number 850-H-100, the quantity and any details from the belt marking or the drive. We will confirm the belt or suggest an equivalent.