V-belt Stark 5VX 850
- Brand
- STARK
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 5VX
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
DODGE and STARK: matching part numbers →DAYCO and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
STARK 5VX 850 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5VX 850 and any equivalents.
The Stark 5VX 850 is a cogged narrow V-belt in the 5VX profile with an 850 mm length. To match it to the belt you are replacing, read the full part number on the back of the old belt and compare both the profile and the length. The same size is also listed under Dayco 5VX 850.
Matching by profile and length is the reliable method. Confirm the old belt is a 5VX profile and that its length marking is 850 mm. The cogged construction is typical of narrow V-belts used on compact, high-speed drives where a standard wrapped belt may not fit the pulley groove properly.
If the old belt is worn or the marking is unreadable, measure the outside length and check the cross-section against a known 5VX belt. Do not substitute a different profile or length without verifying pulley groove dimensions and drive center distance. A belt that is too long or too short will not tension correctly and can damage sheaves or bearings.
When you request a quote, send the part number Stark 5VX 850, the quantity, and the application details. If you are replacing multiple belts on the same drive, order them as a set so they wear evenly. Our team replies by WhatsApp or email and can confirm the right belt or suggest an equivalent.
Dimensions
- Section
- 5VX
Frequently asked questions
- How do I confirm the Stark 5VX 850 is the correct replacement?
- Read the marking on the back of the old belt. It should show a 5VX profile and an 850 mm length. If the marking is worn, measure the outside length and compare the cross-section to a known 5VX belt.
- Can I use a different brand if the size matches?
- The same size is also listed under Dayco 5VX 850. Match the profile and length exactly. If you are unsure, send the old belt marking and drive details for confirmation.
- What information should I include with my quote request?
- Send the part number Stark 5VX 850, the quantity needed, and any drive or application details. If you are replacing a set, include the number of belts on the drive so we can help you order them together.