V-belt Stark 5VX 750
- Brand
- STARK
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 5VX
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
DODGE and STARK: matching part numbers →DAYCO and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
STARK 5VX 750 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5VX 750 and any equivalents.
The Stark 5VX 750 is a cogged narrow V-belt built for drives that need a firm grip in a compact cross-section. Before you fit it, take a few minutes to inspect the sheaves and the rest of the drive. A worn groove or a misaligned pulley will shorten the life of any new belt.
Check each sheave groove for wear, rust, and embedded debris. A groove that has worn wide lets the belt sit too deep, so it slips even when tension is correct. Look for cracks, chips, or a step at the bottom of the groove. If a sheave is badly worn, replacing the belt alone will not restore the drive.
Confirm alignment with a straightedge across the pulley faces. Offset or angled sheaves side-load the belt and cause edge wear. Also spin the driven equipment by hand where possible, and check bearings and bushings for play or rough rotation. Correct any misalignment or bad bearing before installing the new belt.
The Stark 5VX 750 has a 5VX profile and a 750 mm length. The same size is also listed under Dayco as 5VX 750. When you request a quote, send the part number, the quantity, and the drive or equipment it fits. If you are unsure of the profile, read the marking on the back of the old belt and send a photo.
Dimensions
- Section
- 5VX
Frequently asked questions
- What should I check on the sheaves before fitting a Stark 5VX 750?
- Inspect each groove for wear, rust, and debris, and check alignment with a straightedge. Worn or misaligned sheaves will reduce belt life and cause slipping.
- How do I identify the belt I need?
- Read the marking on the back of the old belt. The Stark 5VX 750 is a cogged narrow V-belt with a 5VX profile and a 750 mm length.
- What information should I send with my quote request?
- Send the part number, quantity, and details of the drive or equipment. If you have the old belt, include a photo of the back marking.