V-belt Stark 5VX 600
- Brand
- STARK
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 5VX
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
DODGE and STARK: matching part numbers →MITSUBOSHI and STARK: matching part numbers →DAYCO and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
STARK 5VX 600 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5VX 600 and any equivalents.
The Stark 5VX 600 is a cogged narrow V-belt in the 5VX profile with a length of 600. When replacing a worn belt, confirm both the profile and the length against the belt currently on the drive before ordering. This page covers how to match the Stark 5VX 600 to the belt being replaced.
Start with the belt on the drive. Read the marking on the back: it should show a 5VX profile and a 600 length. If the old belt is worn or the marking is gone, measure the length and check the profile against the pulley groove. A 5VX profile belt will not sit correctly in a pulley cut for a different profile, so confirm both values.
The same size is also listed under Mitsuboshi 5VX 600 and Dayco 5VX 600. If you are cross-referencing from one of those, the 5VX profile and 600 length are the points to match. Send the part number, the profile and the length when you request a quote.
For drives that use more than one belt, replace the full set at the same time so the belts share the load evenly. Inspect the pulleys for wear or debris and check the tension after installation. If you are unsure whether the Stark 5VX 600 is the right belt, send the marking from the old belt and the team can confirm it or suggest an equivalent.
Dimensions
- Section
- 5VX
Frequently asked questions
- How do I confirm the Stark 5VX 600 is the right belt?
- Check the marking on the back of the belt being replaced. It should show the 5VX profile and the 600 length. If the marking is not readable, measure the length and match the profile to the pulley groove.
- Is the same size listed under other brands?
- Yes. The same size is also listed under Mitsuboshi 5VX 600 and Dayco 5VX 600.
- What should I send to request a quote?
- Send the part number Stark 5VX 600, along with the profile and length from the belt you are replacing, by WhatsApp or email. The team replies promptly and can help confirm the right belt or suggest an equivalent.