SKF W 6202-2RS2/C3GFG stainless steel deep groove ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Stainless steel deep groove ball bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding SKF W 6202-2RS2/C3GFG
- W 62Series
- Stainless steel deep groove ball bearings, W 62 series. Series differ in outside diameter and width even when the bore is the same.
- 02Bore
- Bore 15 mm: by standard, 02 designates 15 mm.
- 2RS2/C3GFGSuffix
- SKF suffix: identifies the variant, such as seals or shields, cage, internal clearance or other features.
W 6202 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
SKF W 6202-2RS2/C3GFG measures 15 mm across the bore and 35 mm across the outside diameter; its width is 11 mm (15 x 35 x 11 mm).
SKF W 6202-2RS2/C3GFG belongs to stainless steel deep groove ball bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for W 6202-2RS2/C3GFG and any equivalents.
This SKF stainless steel deep groove ball bearing features rings and balls made of stainless steel, making it suitable for humid or chemically exposed settings where standard bearings would corrode. Typical uses include washing systems, food and beverage lines, pharmaceutical equipment, and marine or chemical environments. MR Industrial Accessories supplies this bearing and can help you select the right seal and lubrication for your application.
The part number follows a logical structure. The prefix W denotes stainless steel construction. The following digits identify the size and series, such as 62 for the 6202 size. Suffixes then specify seals, clearance, and lubricant. For instance, W 6202-2RS2/C3GFG is a 62-series bearing with two contact seals (2RS2), C3 radial internal clearance, and a GFG grease. Reading each segment correctly ensures you order the exact replacement.
Stainless steel bearings are chosen where corrosion would otherwise shorten service life. They appear in food and beverage washdown areas, dairy processing, packaging machines in damp atmospheres, pumps, irrigation systems, marine applications, and chemical plants with vapors or splashes. In these settings, the stainless execution helps reduce downtime caused by oxidation.
Selection depends on the operating conditions. For exposure to pressurized liquids, contact seals like 2RS2 are recommended. At higher speeds, consider non-contact seals. C3 clearance suits thermal expansion or interference fits. The GFG lubricant is formulated for specific conditions, so mixing greases is not advised. During mounting, verify alignment and avoid impacts on the rings. Clean the housing and shaft thoroughly to prevent seal damage.
When cross-referencing between manufacturers, designations for similar stainless steel bearings may differ. Compare principal dimensions, sealing type, internal clearance, and lubrication rather than relying on the series number alone. Suffixes can significantly alter performance. For a replacement from another brand, provide the complete code and dimensions so we can help identify an interchangeable option.
To request a quote for this SKF stainless steel bearing, send the full code via WhatsApp or email. If the code is not available, share the dimensions, sealing type, and operating conditions, and we will assist. MR Industrial Accessories also manufactures split plummer block housings, roller chains, and sheaves.
Dimensions
15 x 35 x 11 mm (d x D x B): boundary dimensions for basic designation W 6202, according to ISO 15.
- Bore
- 15mm
- Outside diameter (D)
- 35mm
- Width (B)
- 11mm
Frequently asked questions
- SKF W 6202-2RS2/C3GFG bearing: what are its dimensions?
- SKF W 6202-2RS2/C3GFG measures 15 mm across the bore and 35 mm across the outside diameter; its width is 11 mm (15 x 35 x 11 mm). Those are the boundary dimensions standardized in ISO 15 for basic designation W 6202.
- What does the prefix W mean in the designation?
- The W prefix indicates that the bearing is made of stainless steel. This makes it suitable for humid or corrosive environments where a chrome steel bearing would rust prematurely. It should not be confused with other prefixes that designate special executions.
- Can I replace a stainless steel bearing with a conventional one?
- It is not recommended if the environment is corrosive, because the conventional bearing will rust and fail in a short time. The choice of stainless steel responds to a need for corrosion resistance. If the environment is dry and clean, a standard bearing may be sufficient.
- How do I request a quote for this bearing?
- Write to us via WhatsApp or email with the complete bearing code, for example W 6202-2RS2/C3GFG, or with the dimensions and characteristics you need. We will respond with alternatives. You can also inquire about larger quantities.