SKF W 6202-2RS2/C3VT127 stainless steel deep groove ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Stainless steel deep groove ball bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding SKF W 6202-2RS2/C3VT127
- W 62Series
- Stainless steel deep groove ball bearings, W 62 series. Series differ in outside diameter and width even when the bore is the same.
- 02Bore
- Bore 15 mm: by standard, 02 designates 15 mm.
- 2RS2/C3VT127Suffix
- SKF suffix: identifies the variant, such as seals or shields, cage, internal clearance or other features.
W 6202 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
SKF W 6202-2RS2/C3VT127 measures 15 mm across the bore and 35 mm across the outside diameter; its width is 11 mm (15 x 35 x 11 mm).
SKF W 6202-2RS2/C3VT127 belongs to stainless steel deep groove ball bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for W 6202-2RS2/C3VT127 and any equivalents.
When equipment is cleaned often or runs in damp conditions, a standard bearing may not last. The SKF stainless steel deep groove ball bearing is built for those situations, carrying radial and axial loads while resisting corrosion. MR Industrial Accessories LLC supplies this line and helps you match the right variant to your application.
Reading the code helps you order correctly. The W at the front tells you the ring material is stainless steel. The four-digit basic number, such as 6202 or 6204, sets the size and load capacity under ISO standards. After that, -2RS2 means rubber seals sit on both sides, /C3 signals internal radial clearance above standard, and VT127 identifies a special lubrication and treatment. Two common examples are W 6202-2RS2/C3VT127 and W 6204-2RS2/C3VT127.
These bearings suit food, chemical, pharmaceutical and water treatment plants, where cleaning liquids and humid air attack ordinary bearings. You will also find them on packaging lines, pumps, fans and conveyors in washdown areas, and in marine or coastal settings where corrosion drives the decision.
Selection comes down to a few points. The -2RS2 seals keep out dust and splashes, but the bearing should not be submerged. Choose C3 clearance when shaft and housing temperatures differ. VT127 lubricant is applied at the factory, so do not blend it with another grease. Align the bearing carefully during mounting and avoid impacts that could harm the seals or balls.
Other makers may list stainless steel bearings with similar designations, yet their suffixes and treatments often differ. Never treat another brand's part number as a direct match without checking dimensions and lubrication conditions. Interchangeability holds only when load, speed and environment requirements line up. For a replacement, compare the technical data and ask a specialist.
To get a quote or clear up questions about this reference, send the complete part number to MR Industrial Accessories LLC on WhatsApp or by email. The team replies promptly and can suggest equivalents or help you choose.
Dimensions
15 x 35 x 11 mm (d x D x B): boundary dimensions for basic designation W 6202, according to ISO 15.
- Bore
- 15mm
- Outside diameter (D)
- 35mm
- Width (B)
- 11mm
Frequently asked questions
- SKF W 6202-2RS2/C3VT127 bearing: what are its dimensions?
- SKF W 6202-2RS2/C3VT127 measures 15 mm across the bore and 35 mm across the outside diameter; its width is 11 mm (15 x 35 x 11 mm). Those are the boundary dimensions standardized in ISO 15 for basic designation W 6202.
- What does VT127 mean on this bearing?
- VT127 is an SKF code for a specific lubrication and treatment, usually tied to corrosion or temperature needs. It is not a universal designation, so check the data sheet for the exact details.
- Can a standard bearing be replaced by this stainless steel one?
- Yes, provided the dimensions and clearance match. Stainless steel resists corrosion better, but confirm load capacity and lubrication conditions. Send us the original part number and we will verify the equivalence.
- Will this bearing handle high-pressure washdowns?
- The -2RS2 seals protect against splashes and dust, not immersion or direct high-pressure washdowns. For those conditions, look at options with more robust seals or ask our technical team.