SKF TMMR 80F-1 reversible puller
- Brand
- SKF
- Category
- Mounting and maintenance tools
- Subcategory
- Mounting and maintenance tools
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF TMMR 80F-1 belongs to reversible puller, part of our Mounting and maintenance tools range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for TMMR 80F-1 and any equivalents.
The SKF TMMR is a mechanical jaw puller built for removing bearings, pulleys, gears and similar shaft-mounted parts. A central spindle applies controlled force while the jaws hold the component securely. Maintenance crews in plants and workshops reach for it when a part has to come off without being damaged. MR Industrial Accessories supplies this SKF line and can help you match the puller to the job.
Reading a TMMR code is straightforward. The number tells you the working range in millimeters, and the suffix tells you how many jaws the tool has. Take TMMR 40F-3: 40 mm of reach, three jaws. TMMR 80F-1: one jaw. Three-jaw versions pull evenly on centered work, while single-jaw versions fit where access is tight. The range covers 40, 60, 80, 120, 200 and 250.
These pullers show up in food processing, cement, mining, petrochemical and power generation, plus fleet and agricultural machinery shops. Production plants use them to pull bearings from pumps, electric motors, gearboxes and conveyor belts. Metalworking shops use them on gears and pulleys. The construction handles parts mounted with interference, which keeps repair and replacement work moving.
Choosing the right puller starts with the outer diameter of the part, its depth and the clearance around it. Make sure the jaws can bite without deforming the component. When you mount the puller, center the spindle and apply force evenly. Greasing the spindle cuts wear and smooths operation. On a tight bearing, apply penetrating oil and give it time before you force anything. Good alignment protects both the tool and the operator.
SKF TMMR pullers work with the original accessories and spare parts. Other brands sell similar tools, but designations and capacities differ. If you are comparing an alternative, check the extraction range, jaw type and spindle thread. Jaws are not always interchangeable between brands, so confirm compatibility before swapping a part. Send us the exact code and we will help you find a suitable option.
If you have the code of your SKF puller, send it by WhatsApp or email to MR Industrial Accessories for a quote. Not sure which model fits? Tell us the component you need to extract and its approximate measurements, and we will point you in the right direction. We serve customers across the United States and in several Latin American countries, and we reply promptly.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does the -1 or -3 suffix mean on TMMR pullers?
- It tells you the number of jaws. A -1 model has a single jaw and works well in tight spaces. A -3 model has three jaws for a more balanced grip on centered extractions. Pick based on access and the part you need to remove.
- How do I choose the correct size of SKF TMMR puller?
- Look at the outer diameter of the part, the depth and the space around it. The number in the designation (40, 60, 80, etc.) is the reach in millimeters. If you are unsure, send us the measurements and the bearing or component code and we will advise you.
- Do you ship throughout the United States?
- Yes, we serve customers across the United States and in several Latin American countries. Once you confirm the model, we will send you a quote. Write to us via WhatsApp or email with the code you need and we will reply promptly.