SKF TMIP 7-60 mounting and maintenance tools
- Brand
- SKF
- Category
- Mounting and maintenance tools
- Subcategory
- Mounting and maintenance tools
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF TMIP 7-60 belongs to mounting and maintenance tools, part of our Mounting and maintenance tools range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for TMIP 7-60 and any equivalents.
The SKF TMIP internal puller is a specialized tool for removing bearings mounted in blind housings, where the back of the bearing is inaccessible for a conventional press. It is commonly used in industrial maintenance, plant repairs, and equipment servicing.
The TMIP series uses a coded designation that indicates the tool's size range. For instance, TMIP 7-28 covers a smaller internal diameter range, TMIP 7-60 extends that range, and TMIP 30-60 is designed for larger sizes. These numbers do not correspond to exact bearing dimensions; they define the puller's reach. To select the correct model, measure the bearing bore diameter and width.
These pullers are found in sectors such as food processing, cement, petrochemical, paper, and general maintenance workshops. They are also used on pumps, electric motors, gearboxes, and transmission equipment. Removing blind-housed bearings without dismantling the entire machine saves time and reduces the risk of damaging the housing or shaft.
Selection depends on bore diameter, depth, and bearing type. The TMIP grips the inner ring using an expansion mechanism. Before use, lubricate the thread and apply force evenly. Proper alignment prevents jaw slippage or deformation. If the bearing is tight, gentle heating of the housing can ease removal.
Other brands offer similar tools, but codes and ranges vary. There is no direct interchangeability between references from different manufacturers; always compare technical specifications. The SKF TMIP series is recognized by its internal extraction system and size ranges. When replacing a tool, base your choice on the bearing's diameter and type, not just the code.
For assistance with an internal puller for blind-housed bearings, send the code or bearing dimensions via WhatsApp. MR Industrial Accessories provides guidance to select the right TMIP model and responds with a quote.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does blind-housed mean for a bearing?
- It means the bearing sits in a cavity with no access from the opposite side, so it cannot be pushed out from behind. The TMIP internal puller grips it from the front and removes it without damaging the housing.
- How do I choose the correct TMIP model?
- Measure the bearing bore diameter and width. Each TMIP model covers a specific range; for example, TMIP 7-28 fits internal diameters within that range. If unsure, provide the measurements and we can help.
- Are there equivalents to SKF TMIP from other brands?
- No direct equivalence exists between codes from different brands. Each manufacturer defines its own ranges and extraction systems. To replace a tool, compare technical specifications and size range.