SKF TMAS 125-050 alignment shim set
- Brand
- SKF
- Category
- Mounting and maintenance tools
- Subcategory
- Mounting and maintenance tools
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF TMAS 125-050 belongs to alignment shim set, part of our Mounting and maintenance tools range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for TMAS 125-050 and any equivalents.
For maintenance teams that need to correct machine position at the mounting points, the SKF TMAS shim set provides a straightforward solution. These calibrated steel shims are placed under supports to adjust level and alignment. MR Industrial Accessories LLC supplies this line to customers across the United States and Latin America.
Reading the TMAS code helps you order the right shim. The first figure gives the shim width in millimeters; the second figure indicates thickness in hundredths of a millimeter. So TMAS 50-010 is a shim 50 mm wide and 0.10 mm thick. Other items in the series include TMAS 2-050, TMAS 50-005, TMAS 50-020, TMAS 50-025, TMAS 50-040, TMAS 50-050 and TMAS 50-070, covering a range of thicknesses.
These shims are used in food processing, chemical, petrochemical and general manufacturing plants. Aligning pumps, motors, compressors and gear reducers is critical in these settings. By inserting shims at anchor points, crews correct vertical and horizontal offsets during installation, which supports accurate leveling and helps lower vibration and premature bearing and seal wear.
Selecting a set starts with the support width and the amount of correction required. You can stack different thicknesses to reach the target alignment. Before placing shims, clean the mating surfaces and remove any burrs that could affect precision. No lubrication is needed, but keeping the shims free of dirt and debris is important. Careful installation helps maintain alignment repeatability.
SKF TMAS calibrated shims can be substituted with equivalent products from other manufacturers when dimensions and material match. Because interchangeability depends on tolerances and surface finish, it is wise to check the technical specifications. For a quote, send the full part number and quantity by WhatsApp or email; our team responds promptly and can suggest equivalents or help you choose.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What is an SKF TMAS shim set used for?
- It is a set of steel shims with controlled thickness used to align and level machines. They are placed at supports to correct deviations, supporting precise assembly and reducing vibration.
- How do I choose the right thickness of TMAS shims?
- Choose based on the correction needed. The TMAS code shows width and thickness in hundredths of a millimeter. You can combine several shims to achieve the exact adjustment.
- Are SKF TMAS shims compatible with other brands?
- They can be interchanged with equivalent products from other brands if dimensions and material match. We recommend verifying tolerances and asking us about suitable options.