SKF TLMR 101 automatic lubricator

SKF TLMR 101 belongs to automatic lubricator, part of our Greases and lubrication range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for TLMR 101 and any equivalents.

The SKF TLMR is a battery-operated electromechanical lubricator that feeds lubricant to a single point in a controlled, continuous manner. It can be mounted directly on the point or connected remotely with a hose, and its discharge frequency can be programmed so the lubricating film is maintained without manual attention. This makes it a practical choice for equipment that is hard to reach or where manual relubrication is not carried out as often as it should be.

Reading the TLMR code: the letters stand for the automatic lubricator family, and the number that follows identifies the model. TLMR 101 and TLMR 201, for instance, are two variants in the same series. That number does not tell you the cartridge size or the discharge range; those details come from the model's data sheet. If you are unsure, send us the full code and we will confirm the specifications.

Typical applications include food, cement, mining, petrochemical and power generation plants. These units are used on bearings of electric motors, pumps, fans, conveyors and other equipment that runs continuously. Many facilities install them to replace manual lubrication at critical or difficult-to-access points, lowering the risk of failure from too little or too much lubricant.

When selecting a lubricator, consider the lubricant type (grease or oil), the cartridge volume (120 or 380 ml), the operating temperature and the relubrication interval the point requires. Mounting can be direct or remote with a hose; in either case, confirm the thread matches and that the unit is firmly secured to prevent vibration issues. Adjust the discharge programming to suit the application and follow the manufacturer's instructions for commissioning.

Automatic lubricators from other brands may serve a similar purpose, but they are not direct replacements: threads, cartridges, discharge ranges and accessories differ. For that reason, it is best to request a quote using the exact code of the unit you need to replace. We supply the SKF brand and can help you find the model that fits your application.

If you already have the code of the lubricator you use or plan to replace, send it to us on WhatsApp along with a photo of the lubrication point. We will quote the unit and the accessories required for installation. We can also help you define the right configuration based on the bearing type and operating conditions.