SKF TKSA ROD90 mounting and maintenance tools

SKF TKSA ROD90 belongs to mounting and maintenance tools, part of our Mounting and maintenance tools range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for TKSA ROD90 and any equivalents.

The SKF TKSA ROD is a laser-based instrument for verifying and adjusting the alignment of shafts on rotating equipment. It comes into play during installation, start-up, and predictive maintenance programs, where shaft misalignment leads to vibration, bearing damage, and early component failure. MR supplies this line and helps you select the appropriate version based on your shaft dimensions and the span between measurement locations.

In the SKF TKSA ROD family, the number that follows the name—such as TKSA ROD90 or TKSA ROD150—defines the range of shaft or pipe diameters that the mounting brackets can accommodate. A larger number corresponds to a broader maximum diameter. Before choosing, gather the outside diameter of the shaft or flange where the brackets will sit and the distance between the two measurement planes.

These alignment tools are found in food and beverage production, petrochemical complexes, cement plants, paper mills, water treatment facilities, and power stations. Maintenance shops also rely on them for pumps, electric motors, gearboxes, compressors, fans, and transmission housings. They are frequently used during plant shutdowns and by contractors providing alignment services.

Proper bracket mounting is critical: the brackets must hold the shaft securely without distorting it, and all contact surfaces should be clean. Laser alignment allows angular and parallel errors to be corrected more quickly than with dial indicator methods. Before taking measurements, verify the condition of couplings, bearing lubrication, and base leveling. If the machine is mounted on vibration isolators, take their influence into account.

SKF TKSA ROD units can be used alongside laser shaft alignment systems from other manufacturers, as long as the brackets and software match the working diameter and distance. Part numbers are not universally interchangeable because each maker sets its own ranges and accessories. For a replacement, compare technical specifications and seek expert advice.

If you have the part number of your current alignment tool or the dimensions of the shaft to be aligned, send us a message on WhatsApp. MR will quote the SKF TKSA ROD model that fits your application and recommend the necessary mounting accessories.