SKF TKBA G2 mounting and maintenance tools
- Brand
- SKF
- Category
- Mounting and maintenance tools
- Subcategory
- Mounting and maintenance tools
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF TKBA G2 belongs to mounting and maintenance tools, part of our Mounting and maintenance tools range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for TKBA G2 and any equivalents.
The SKF TKBA G2 is a laser alignment tool for belt drive pulleys. It projects a reference line onto the pulleys so you can compare their relative position and spot angular or parallel misalignment. This helps prevent vibration, belt wear and bearing overload. The unit is portable, works in the plant or in the field, and does not need to touch the pulleys.
The code TKBA G2 breaks down as follows: TK indicates a mounting and maintenance tool, A means it is for pulleys, and G2 identifies the generation. To select the correct model, consider pulley type, diameter and center distance, and check the current data sheet. If you need a different variant in the series, MR can quote it by part number.
Typical users include food and beverage, cement, steel, paper and mining plants, as well as maintenance shops and field service teams. You will find it on production lines with belt drives, pumps, fans, compressors and mills. It is also used when installing new equipment and after repairs, where pulley alignment is critical to avoid unplanned downtime and to extend belt and bearing life.
For proper use, clean the pulley faces and remove any burrs from the support surface before mounting. The aligner attaches with magnets or brackets depending on the model. Make sure the laser beam reaches the opposite pulley and adjust until the line matches the reference. Check both angular and parallel deviation. Always lock out the drive before starting. Follow the manufacturer's instructions for calibration and lens care.
SKF pulley laser aligners work with different brands of pulleys and belts because the measurement is optical and does not depend on the drive manufacturer. When requesting a quote, provide the full part number and, if possible, the application and pulley dimensions. MR Industrial Accessories supplies this brand as part of its mounting and maintenance tool line and can advise you on the most suitable variant for your equipment.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What is the SKF TKBA G2 used for?
- It is a pulley laser aligner: a mounting and maintenance tool that projects a light beam to check alignment between pulleys and belts. It detects angular or parallel deviations in belt drives; it is not a distance meter or a level.
- How do I use the pulley laser aligner?
- Mount it on the pulley or its support, turn on the laser and compare the projected line with the opposite pulley. Adjust until the reference matches. Always with the machine stopped and locked out. Follow the manufacturer's manual for calibration and care.
- How can I request a quote for the SKF TKBA G2?
- Send the part number TKBA G2 by WhatsApp or email to MR Industrial Accessories. If possible, include the application and pulley dimensions. The team will reply promptly and can suggest equivalents or help you choose.