SKF SYK 35 TR y-bearing unit

SKF SYK 35 TR belongs to y-bearing unit, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SYK 35 TR and any equivalents.

The SKF SYK TR is a ready-to-mount unit made up of a cast iron housing and a Y-series insert bearing. It supports rotating shafts on fixed frames, carries radial loads and absorbs a limited amount of misalignment. Belt and chain drives, conveyors and general machinery are the usual places where this unit fits.

Reading the code helps you order the right size. SYK points to the cast iron housing with its insert bearing. The digits that follow give the shaft diameter in millimeters, and TR tells you the insert has an extended inner ring locked to the shaft with set screws. So SYK 20 TR fits a 20 mm shaft, SYK 25 TR fits a 25 mm shaft, and the pattern continues.

The flat base with its mounting holes bolts easily onto profiles, frames or machine beds. Because the unit is self-aligning, small errors between shaft and structure are absorbed during assembly, which keeps installation simple and maintenance work down. Plants running packaging lines, conveyors, agricultural equipment, mills and process machinery use these units for that reason.

When selecting a size, check the shaft diameter, whether the load is radial, axial or combined, and the conditions around the machine. The insert arrives pre-lubricated, and its seals hold the grease in while keeping contaminants out. Seat the base firmly and tighten the set screws onto the shaft without marking it. Good alignment is what keeps the bearing running properly over time.

Units from other manufacturers can replace this one when the key dimensions line up: shaft diameter, center height and hole spacing. Part numbers alone do not tell the whole story, so measure the critical dimensions before swapping a unit out. MR Industrial Accessories supplies SKF as a brand.

Replacing a worn unit or building a new drive starts with the complete part number. Send it to us on WhatsApp or by email and the team will reply promptly, confirm the size and, when needed, suggest an equivalent or help you pick the right unit for the application.