SKF SYK 30 TF y-bearing unit
- Brand
- SKF
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF SYK 30 TF belongs to y-bearing unit, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SYK 30 TF and any equivalents.
The SKF SYK TF Y-bearing pillow block arrives as a complete assembly: a Y-series insert bearing seated in a cast iron or stamped steel housing. It supports rotating shafts where space is limited and alignment is not perfect, since the spherical insert compensates for small angular errors. MR Industrial Accessories supplies this line and helps you match the right configuration to your equipment.
Reading the code helps when you are choosing a replacement. SYK points to the pillow block housing style, and TF covers the sealing and locking arrangement. Take SYK 30 TF: the number 30 is the shaft diameter in millimeters, the insert belongs to the Y series, the seal is a contact type, and set screws lock the inner ring to the shaft. Other sizes in the series follow the same pattern, with only the shaft dimension changing.
Typical installations include conveyor lines, mixers, fans, centrifugal pumps, food and agricultural machinery, and textile equipment. The housing can be bolted to a flat surface or a flange, with two or four holes depending on the variant. Because the insert is spherical, minor misalignment between the shaft and the support is absorbed without extra shimming.
Selection comes down to a few inputs: shaft diameter, whether the load is radial, axial or combined, rotation speed, and the environment. The TF seal handles dust and moisture, but for washdown or fine particles you may want to add auxiliary seals. During installation, verify the support surface is flat, tighten the set screws with the correct wrench, and lubricate the insert as specified. The self-aligning feature gives you some room to correct small mounting errors.
When replacing an existing unit, remember that Y-bearing pillow blocks from different brands often share standardized boundary dimensions but can differ in locking method, seal design and load capacity. Compare shaft diameter, bolt hole spacing and height to center before committing. MR Industrial Accessories can review the SKF options it supplies and point you to a compatible choice.
If you have the part number or just the shaft dimensions, send them over WhatsApp or email and the team will get back to you promptly. They can also suggest equivalents and help you settle on the right Y-bearing pillow block for your application.
Dimensions
- Código universal
- UCP 206
Frequently asked questions
- What does the TF suffix indicate on an SYK pillow block?
- TF identifies a construction variant of the housing and insert, generally tied to the sealing method and the locking system. In practice it points to a contact seal and set screws for shaft mounting. For the exact details of a specific part number, contact us with the full code.
- Does SYK 30 TF fit a 30 mm shaft?
- Yes, the 30 in SYK 30 TF is the shaft diameter in millimeters, following the standard series designation. If your shaft is a different size, we can look up the equivalent number in the same category. Send us the diameter and operating conditions for guidance.
- How do you mount a Y-bearing pillow block with insert bearing?
- Bolt the housing to the structure, slide the shaft into the bearing, then tighten the set screws on the inner ring. Check alignment and lubricate according to the specification. The spherical insert lets you correct minor mounting errors.