SKF SAFD 524/K7/C-09-064 sAF split plummer block housing
- Brand
- SKF
- Category
- Bearing housings
- Subcategory
- SAF split plummer block housing
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF SAFD 524/K7/C-09-064 belongs to sAF split plummer block housing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SAFD 524/K7/C-09-064 and any equivalents.
The SKF SAF split plummer block is a two-piece housing that supports a bearing on a rotating shaft. Because the housing separates, it can be placed on an existing shaft and removed without pulling apart the surrounding equipment, which keeps maintenance work simpler. It is used where a rigid, well-aligned support is needed.
The code tells you what you are ordering. SAFD is the split plummer block family. The number that follows, such as 524, is the housing size. K7 identifies the seal arrangement. The final group, C-08-129 or C-09-064, marks a construction variant. Two examples of full designations are SAFD 524/K7/C-08-129 and SAFD 524/K7/C-09-064.
These housings fit belt conveyors, mills, mixers, centrifugal pumps, fans and gear reducers, and they appear in food processing, cement, mining, petrochemical and power generation plants. The split body lets you install or replace a unit on a shaft without stripping the whole drive, which suits both planned and emergency maintenance. It also helps with alignment and handles radial and axial loads while limiting vibration.
When selecting a size, look at shaft diameter, the load the bearing will carry, rotation speed and the surrounding conditions. Seal choice matters: labyrinth or double-lip seals are the usual pick for dusty or damp areas. Lubrication should match the bearing and the duty cycle, using compatible grease or oil. At mounting, line up the housing and shaft carefully and tighten the bolts evenly so the housing does not distort.
For interchangeability, SAF housings that share the same dimensions and specifications can accept bearings from other makers, but confirm tolerances and housing design before fitting. The SAF series is widely used, so similar products exist across brands; check compatibility tables rather than assuming a match. MR Industrial Accessories LLC supplies these housings to customers in the United States and several Latin American countries, and can review your part number and suggest equivalents.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does the SAFD prefix mean in a split plummer block?
- SAFD identifies a split plummer block in the SAF series with a particular design. The number after it gives the housing size, and the suffixes describe the seal and construction variant.
- How do I pick the right seal for my conditions?
- For dusty or humid locations, labyrinth or double-lip seals are typical. In cleaner settings a simpler seal may work. Check speed and temperature when choosing the seal material.
- Can SKF SAF housings be swapped with other brands?
- Often yes, if dimensions and specifications line up. The SAF series is a common standard, but verify tolerances and housing design. MR can help you confirm compatibility.