SKF SAFD 524/C-09-064 sAF split plummer block housing
- Brand
- SKF
- Category
- Bearing housings
- Subcategory
- SAF split plummer block housing
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF SAFD 524/C-09-064 belongs to sAF split plummer block housing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SAFD 524/C-09-064 and any equivalents.
The SKF SAF split housing supports rotating shafts in power transmission systems. Its two-piece construction and locking ring let you service or replace the bearing without pulling the shaft. Typical installations include conveyors, mills and centrifugal pumps that need stable alignment.
The code SAFD …/C-… breaks down into three parts. SAFD is the series name for split housings supplied with a locking ring. The digits after the slash give the bearing size the housing accepts. The /C-… suffix covers sealing or configuration options. A complete example is SAFD 524/C-09-064, where 524 is the size and C-09-064 is the variant. Match the shaft diameter and the bearing you plan to install against the series table before ordering.
Food processing, cement, mining and aggregate operations use these housings. Belt conveyors, bucket elevators, mixers and process pumps are common locations. Because the housing splits, maintenance crews can swap the bearing without disturbing the shaft or the drive. Industrial fans and hammer mills also rely on them where vibration and load demand a firmly anchored, rigid support.
Selection starts with confirming the bearing series, usually deep groove ball or cylindrical roller. Sealing matters: labyrinth seals or radial shaft seals are chosen based on dust, water and temperature exposure. Check that bearing internal clearance suits the housing fit. At assembly, align both halves and tighten the connecting bolts to the specified torque. Grease or oil lubrication is possible, depending on housing design and service conditions.
SKF SAF housings can be interchanged with other brands that share the same dimensional standard. Suffixes do not always match, so verify the full code plus shaft and bearing dimensions. We supply SKF and can advise on compatibility with other lines we carry. Send the exact designation if anything is unclear.
To request a SAF split housing, message us on WhatsApp with the complete code. We will quote it and help you pick the right sealing and accessories for your application.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does the designation SAFD 524/C-09-064 mean?
- SAFD is the series for a split housing with locking ring. 524 is the size that defines the bearing to be housed. C-09-064 is a configuration or sealing variant. Send us the full code for a precise interpretation.
- Is this housing suitable for any bearing?
- No. Each SAF housing fits a specific bearing size and type, generally deep groove ball or cylindrical roller bearings. Confirm bearing and housing compatibility before mounting.
- How do I request a quote for a SAF housing?
- Send the complete housing code, for example SAFD 524/C-09-064, and the quantity you need via WhatsApp. We will reply with the quote and can help if you are unsure of the code.