SKF PER.SER215-47M y-bearing (insert bearing)
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Y-bearing (insert bearing)
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF PER.SER215-47M belongs to y-bearing (insert bearing), part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PER.SER215-47M and any equivalents.
The SKF PER.SER Y-bearing is an insert with an extended inner ring and two set screws, designed for fastening to a shaft without machining. It fits into split or solid housings and is commonly found in equipment with drive shafts, such as conveyors, mixers, and fans. The set screw design allows for alignment and securement without shaft modification, which simplifies maintenance.
The part number PER.SER…M follows a logical structure: PER denotes the Y-bearing type, SER indicates the dimensional series, and the M suffix identifies a sealing or execution variant. For example, PER.SER215-47M and PER.SER216-51M show how the central digits specify the insert size, while the numbers after the hyphen give the shaft diameter in millimeters. This coding helps you match a replacement to the mounting requirements.
These bearings are used in belt conveyors, bucket elevators, feed mixers, industrial washing machines, and process equipment. They handle radial loads and some axial thrust, making them suitable for drive shafts with slight misalignment. They appear in food plants and aggregate processing, where dust or moisture may be present.
Selection requires checking the shaft diameter and the housing type. Set screw mounting needs adequate shaft hardness to prevent marks; adapter sleeves are an alternative. Many Y-bearings are lubricated for life, but severe applications may require relubrication. Proper alignment between housings is critical to avoid extra loads and extend service life.
Y-bearings from different brands are often interchangeable if bore diameter, outer diameter, and width match. However, fixing and sealing systems can differ. When replacing an insert, compare the complete part number and confirm that sealing and internal clearance are equivalent. Our technical team can assist with cross-referencing.
To request a quote for this SKF Y-bearing, send the full part number via WhatsApp or email. MR Industrial Accessories serves customers across the United States and several Latin American countries, and we can also quote a compatible housing if needed. Our team responds promptly and can suggest equivalents.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- How is a Y-bearing with set screws mounted?
- The insert is placed in the housing and slid onto the shaft. Then the set screws on the inner ring are tightened with an Allen key to the recommended torque. Ensure the shaft is clean and free of burrs to avoid misalignment.
- Does this bearing need periodic lubrication?
- Most Y-bearings are lubricated for life and require no maintenance. In dirty, humid, or extreme-temperature environments, relubrication may be needed. Check your application conditions to set the frequency.
- Can I replace a Y-bearing from another brand with this SKF one?
- Yes, if the main dimensions and fixing type match. Verify bore, outer diameter, and width, and that the sealing is suitable. If unsure, send us the original part number and we will help find the equivalent.