SKF PER.HCN208-24A-A y-bearing (insert bearing)
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Y-bearing (insert bearing)
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF PER.HCN208-24A-A belongs to y-bearing (insert bearing), part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PER.HCN208-24A-A and any equivalents.
The SKF PER.HCN Y-bearing is a bearing insert from the Y-bearing family, intended for split housings or machined seats. It features a spherical outer ring to compensate for misalignment and locks onto the shaft with set screws. It is chosen when mounting simplicity and protection against dust and moisture are important.
The part number follows a pattern. PER denotes inserts with a spherical outer ring and set screw locking. HCN refers to the sealing and mounting design. The digits indicate shaft and outer diameters, as in PER.HCN208-24A-A or PER.HCN310A-A. A trailing A marks a variant with a particular seal or hole arrangement. To pick the right insert, note the shaft size and the housing type.
These inserts appear in belt conveyors, bucket elevators, packaging lines, mixers, mills and process equipment across food, chemical and aggregate operations. They also serve in road and agricultural machinery, roller shafts and transmission systems running at moderate speeds with radial and light axial loads. In humid or dusty settings, the HCN seal helps keep contaminants out.
Selection requires matching the shaft diameter to the number in the code and ensuring the housing accepts the spherical outer ring. In harsh environments, inspect seal lips and lubrication regularly. When mounting, tighten the set screws to the recommended torque and verify housing alignment. Proper lubrication and periodic retightening support a long service life.
Y-bearings interchange by dimensions: an insert with the same shaft and outer diameters can replace another brand if the locking method and seal suit the housing. For a quote, provide the full part number or the shaft and housing measurements. If the insert lacks identification, send a photo and key dimensions.
For a quote on an SKF PER.HCN Y-bearing, message us on WhatsApp with the part number PER.HCN208-24A-A, PER.HCN310A-A or your required size. MR Industrial Accessories will respond promptly and help you select the right variant. We can also advise on housings, seals and lubricants for the installation.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does the PER.HCN designation mean on a Y-bearing?
- PER indicates inserts with a spherical outer ring and set screw locking. HCN identifies the sealing and mounting details. The numbers that follow correspond to the shaft diameter and the outer diameter. A final A suffix denotes a specific sealing or hole variant.
- How do I choose the right Y-bearing for my equipment?
- You need the shaft diameter, the outer diameter of the insert and the housing type. Also consider moisture, dust, load and speed. With that information, we can quote the exact part number or a compatible equivalent.
- Can SKF Y-bearings be replaced by another brand?
- Yes, interchangeability is based on shaft and housing dimensions and the locking type. If the housing accepts the spherical outer ring and the sealing is compatible, an equivalent insert from another brand can be used. Send the part number or measurements and we will confirm the alternative.