SKF PER.HCN207A y-bearing (insert bearing)
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Y-bearing (insert bearing)
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF PER.HCN207A belongs to y-bearing (insert bearing), part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PER.HCN207A and any equivalents.
For maintenance teams working with conveyor systems, fans, or mixers, the SKF PER.HCN Y-bearing insert offers a practical solution. It features a spherical outer ring and set screw locking, making it suitable for split plummer block or flanged housings. This design allows for minor misalignment compensation and straightforward installation on solid shafts, supporting rotating equipment in demanding environments.
The part numbering follows a clear pattern. The PER prefix denotes inserts with a spherical outer ring and screw locking, while the following digits indicate the bore size. For instance, PER.HCN207A fits a 35 mm shaft, and PER.HCN308-24A fits a 40 mm shaft. The trailing A refers to a specific construction detail, often tied to the sealing arrangement or inner ring geometry.
Typical applications span belt conveyors, bucket elevators, mixers, mills, and fans across food processing, chemical, cement, and aggregate operations. In dusty, humid, or washdown-heavy settings, these inserts are chosen for their ability to handle contamination when properly protected. Mounting in split housings simplifies maintenance, allowing replacement without dismantling the entire shaft assembly.
When selecting an insert, confirm the shaft diameter and housing type. Set screw locking demands a shaft with adequate hardness and surface finish to prevent slippage. Evaluate the sealing needs: in dirty or wet conditions, extra protection is recommended. Use the specified lubricant and ensure the housing is aligned so the spherical outer ring operates without side loads.
For replacements, compare bore diameter, outer diameter, and width. Inserts with a spherical ring are often interchangeable across brands if these dimensions and the locking method align. If a competitor's code doesn't match, provide the shaft size and housing dimensions, and we'll help identify a suitable equivalent.
To request a quote for the SKF PER.HCN Y-bearing you need, send the full code via WhatsApp or email. If the designation is unclear, share the shaft diameter and housing dimensions, and we'll determine the exact reference. We can also advise on installation and appropriate lubrication for your specific application.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does the A suffix indicate in PER.HCN207A?
- The A suffix denotes a construction variant within the PER.HCN series, which may involve differences in sealing, inner ring design, or dimensions. For precise details on your code, contact us with the complete reference.
- How can I verify compatibility with my housing?
- Ensure the shaft diameter matches the basic number (207 for 35 mm, 308 for 40 mm) and that the housing has a corresponding spherical seat. For split plummer block or flanged housings, the insert type must match. If uncertain, send us the housing dimensions.
- What lubrication is recommended for a PER.HCN Y-bearing?
- These inserts typically arrive pre-lubricated, but for ongoing service, follow the manufacturer's guidance. In dusty or humid conditions, inspect seals regularly and relubricate based on operating conditions. Contact us for lubricant selection advice.