SKF PER.G207HRR28 y-bearing (insert bearing)
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Y-bearing (insert bearing)
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF PER.G207HRR28 belongs to y-bearing (insert bearing), part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PER.G207HRR28 and any equivalents.
The SKF PER.G207HRR28 is a Y-bearing insert with an extended inner ring and screw locking, intended for split plummer block or flanged housings. It suits rotating shaft applications that need misalignment compensation and protection from contaminants. The sealing arrangement and relubrication option make it a practical choice for demanding conditions. MR supplies this SKF bearing and can help you confirm the right variant for your equipment.
Reading the code helps with selection. PER identifies the insert series with extended inner ring and set screw locking. G means the outer ring has a lubrication groove. The 207 size code sets the main dimensions. HRR describes the sealing type, with contact lips and extra protection. The 28 suffix is an internal variant or tolerance indicator. For exact dimensions of this code, check the data sheet or contact us.
These inserts are common in conveyors, belts, elevators, mixers, fans and agricultural machinery. They also appear in food plants, cement plants, quarries and material handling systems where dust, moisture or frequent washdowns are present. The extended inner ring simplifies mounting on shafts and allows firm locking with screws, so field replacement does not require a press.
Selection should consider shaft diameter, radial and axial load, and the operating environment. HRR sealing guards against particles and splashes, but for immersion or pressure washing, evaluate additional seals. Internal clearance and lubrication must match the running speed. During mounting, align the housing and tighten the locking screws with a torque wrench to the specification to avoid deformation.
Y-bearings are interchangeable between manufacturers when dimensions, locking system and sealing type match. Brands such as SKF, FAG, NSK or NTN offer inserts with similar characteristics, but always verify the complete code and tolerances. Suffixes are not always equivalent: a different seal can change resistance to contamination. MR supplies SKF and can guide you on a suitable equivalence.
For a replacement, send the complete code via WhatsApp or email to MR. We will quote the SKF PER.G207HRR28 or an equivalent for your equipment. We can also advise on housings, lubricants and mounting tools to support a lasting repair.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does the HRR suffix mean on this bearing?
- HRR indicates a sealing type with contact lips and additional protection against contaminants. It is a common configuration for dusty or moist environments. For the exact characteristics of this code, consult the data sheet or write to us.
- Can it be mounted in a standard split plummer block housing?
- Yes, Y-bearings with extended inner ring are typically mounted in split plummer block or flanged housings. Check that the outer diameter and locking system match the housing. If unsure, send us the dimensions and we will advise.
- How is this bearing lubricated?
- The G suffix indicates a lubrication groove in the outer ring, which allows relubrication through a grease fitting in the housing. Use a grease compatible with the application and follow the manufacturer's recommendations for frequency. Do not mix greases with different bases.