SKF NU 1013 ML cylindrical roller bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Cylindrical roller bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding SKF NU 1013 ML
- NU 10Series
- Cylindrical roller bearings, NU 10 series. Series differ in outside diameter and width even when the bore is the same.
- 13Bore
- Bore 65 mm (13 × 5).
- MLSuffix
- SKF suffix: identifies the variant, such as seals or shields, cage, internal clearance or other features.
NU 1013 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
SKF NU 1013 ML measures 65 mm across the bore and 100 mm across the outside diameter; its width is 18 mm (65 x 100 x 18 mm).
SKF NU 1013 ML belongs to cylindrical roller bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for NU 1013 ML and any equivalents.
SKF NU ML cylindrical roller bearings are built for high radial loads and elevated speeds. Their cylindrical rollers run on parallel raceways, which supports rigid, stable operation in tough industrial settings. Typical uses include gearboxes, pumps and transmission equipment where load capacity and stiffness matter. MR Industrial Accessories supplies this line as part of its SKF bearing range.
Reading the code helps you match a bearing to the job. NU means the outer ring has two ribs and the inner ring has none, so the shaft can shift axially relative to the housing. The number that follows, as in NU 1008 ML, sets the size and dimensional series. ML tells you the cage is machined brass, a choice that suits high speeds and heavy loads. This layout is often picked when axial guidance in one direction is needed.
You will find NU ML bearings in many industrial settings. Gearboxes and reducers rely on their radial capacity. Industrial pumps, compressors, machine tools and power transmission equipment also use them. In metallurgical and mining operations they carry heavy loads under harsh conditions. Because the design allows interference fits on the shaft, they hold precise positioning in rotating machinery over time.
When choosing an NU ML bearing, look at the radial load, the speed and the environment. The brass cage helps with strength and heat dissipation. During mounting, line up shaft and housing carefully to avoid extra stresses. Use the right lubricant for the operating conditions, and select sealing based on how much contamination is present. Follow the manufacturer's recommended internal clearances.
For replacements, SKF NU series bearings with the ML suffix can be swapped with other brands that use the same dimensional and structural designation. Check tolerances and cage type, since performance can differ between makers. To substitute safely, compare technical data and ask a specialist. MR Industrial Accessories can help you pick a suitable equivalent.
To get a quote for an SKF NU ML cylindrical roller bearing, send the full code to MR Industrial Accessories by WhatsApp or email. Our team replies promptly and can suggest equivalents or help you choose the right bearing for your application.
Dimensions
65 x 100 x 18 mm (d x D x B): boundary dimensions for basic designation NU 1013, according to ISO 15.
- Bore
- 65mm
- Outside diameter (D)
- 100mm
- Width (B)
- 18mm
Same size, other brands
Other brands' pages with basic designation NU 1013: 65 x 100 x 18 mm (d x D x B) per ISO 15.
- FAGNU1013-XL-M1
- NSKNU1013(M)
- NTNNU1013
- RKBNU 1013
What they share are the ISO 15 boundary dimensions, not the specs: seals or shields, internal clearance, cage and load rating may vary with brand and suffix. Every quote is by full part number.
Frequently asked questions
- SKF NU 1013 ML bearing: what are its dimensions?
- SKF NU 1013 ML measures 65 mm across the bore and 100 mm across the outside diameter; its width is 18 mm (65 x 100 x 18 mm). Those are the boundary dimensions standardized in ISO 15 for basic designation NU 1013.
- What does the ML suffix mean in an SKF NU bearing?
- ML indicates a one-piece machined brass cage that is roller-centered. This cage works well at high speeds and loads and resists fatigue and wear.
- Where are NU ML bearings used?
- They appear in gearboxes, pumps, compressors, machine tools and transmission equipment across many industries, especially where radial loads and speeds are high.
- How do I request a quote for SKF NU ML bearings?
- Send the exact bearing code to MR Industrial Accessories on WhatsApp or by email. We will get back to you promptly with the information you need.