SKF MRC.5308 MFG double row angular contact ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Double row angular contact ball bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF MRC.5308 MFG belongs to double row angular contact ball bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for MRC.5308 MFG and any equivalents.
The MFG suffix in the SKF MRC line identifies double row angular contact bearings. Because they take radial and axial forces in both directions, they suit arrangements that call for stiffness and accurate running, including machine tool spindles, pumps and gearboxes. MR Industrial Accessories LLC supplies this line and helps buyers match the right execution to the job.
Reading the code is the first step. An MRC prefix comes first, then a series number, then MFG, so MRC.5308 MFG belongs to the 5300 series and confirms the double row angular contact layout. The MFG ending marks a variant whose cage or preload details differ from the standard version, so the manufacturer's tables are the place to confirm those characteristics along with the boundary dimensions and load ratings.
Typical service covers metalworking, food processing and chemical plants. You will find these bearings in milling machine main spindles, high pressure pumps, compressors and gearboxes, where combined loading and structural rigidity decide how long the equipment runs between repairs.
Selection depends on how heavy the loads are, which direction they act in, the operating speed and the surrounding conditions. Fitting calls for correct alignment and the right lubricant, grease or oil as the application requires. Seals or shields matter for keeping grease in and contamination out, so check whether the bearing includes them. Keep the specified internal clearance and use tooling that will not mark the raceways.
Interchange is possible with equivalent bearings from other makers when the principal dimensions and load ratings line up. Tolerances and internal clearance are not always the same across brands, so compare the technical data rather than the code alone, and let our team review compatibility before you commit.
To request a quote, send the complete code by WhatsApp or email. We respond promptly, can point you to equivalents and assist with the final choice.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does MFG indicate on an SKF MRC bearing?
- It marks a particular variant in the MRC range, usually tied to cage, preload or lubrication details. Check the manufacturer's catalogue, or send us the full code and we will confirm it.
- When should I pick a double row bearing over a single row one?
- A double row version carries axial loads in both directions and runs more rigidly, which fits combined loading. A single row works when the axial load goes one way only. Look at the load and speed of your equipment before deciding.
- Can MR Industrial Accessories LLC quote SKF bearings?
- Yes. Send the part number through WhatsApp or email and we will come back with the technical and commercial information you need.