SKF MRC.5220C double row angular contact ball bearing

SKF MRC.5220C belongs to double row angular contact ball bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for MRC.5220C and any equivalents.

When a shaft position has to take radial and axial forces at the same time, in both directions, the SKF MRC.…C double row angular contact bearing is one of the usual answers. Two ball rows set at opposed contact angles give the bearing its stiffness, so it suits locations where guidance has to be accurate and loads arrive from either side. Gearboxes, spindles, pumps and transmission equipment are typical homes for it. MR Industrial Accessories supplies this SKF line and can help you pin down the right part number.

Reading the code is straightforward. MRC marks the double row angular contact family. The digits that follow, shown here as #, carry the size and dimension series. The trailing C is a construction variant inside that family. Compare MRC.5220C with MRC.5311C: only the numeric block changes with size, while MRC and the C stay put. For a replacement, quote the full designation exactly as it appears on the bearing marking or on the drawing.

These bearings fit positions that see axial load from both sides and need a stiff mounting. They turn up in gearboxes, machine tool spindles, centrifugal pumps, compressors, draft fans, and belt or chain drives, as well as in textile and packaging machinery and continuous process lines where rotational accuracy has to repeat. Because one double row bearing does the work of two single row units, the surrounding design gets simpler.

Choosing the part number starts with the radial and axial loads, the speed, and the environment. Protection matters: dust, moisture or chips call for extra sealing or a bearing supplied with seals. Clearance and lubrication should follow the manufacturer's guidance, since either one set wrong will cut service life. Shaft-to-housing alignment also counts, because a mounting that is out of line adds parasitic loads even though the bearing tolerates some deviation.

Interchange is not a simple lookup. Double row angular contact bearings are defined by their full designation, and that designation differs from one maker to the next. There is no universal conversion table, so an alternative has to be checked against dimensions, contact angle, clearance and load capacity. Often the other maker's number does not even carry the same digit count. Send the equipment details together with the original part number and we will work out the match.

Have the MRC.…C number ready? Send it over WhatsApp or email and we will prepare the quote. If you are weighing a sealed against an open variant, or want interchangeability with another manufacturer confirmed, we can advise on that too. MR Industrial Accessories handles SKF bearings alongside other lines to keep your equipment running.