SKF HS 313 adapter sleeve
- Brand
- SKF
- Category
- Bushings and sleeves
- Subcategory
- Adapter sleeve
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF HS 313 belongs to adapter sleeve, part of our Bushings and sleeves range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for HS 313 and any equivalents.
An SKF HS series adapter sleeve is the mounting piece that holds a tapered-bore bearing on a cylindrical shaft. Paired with its lock nut, it gives a firm hold that can still be adjusted when needed, which makes it a workable option for putting bearings on and taking them off rotating equipment.
Read the code by taking the HS prefix plus the three digits that follow it as a size reference. HS 206, HS 207, HS 208, HS 210, HS 211, HS 212, HS 213 and HS 215 each sit at a different shaft diameter. Those digits are not a measurement you can use directly; they tie back to the bearing and shaft dimensions. The safe route is to start from the bearing you are mounting and check it against the compatibility tables.
Food, chemical, mining and general manufacturing plants are typical users, anywhere a tapered-bore bearing has to sit on a cylindrical shaft. Conveyors, pumps, fans, mixers and transmission equipment are common homes for them. The sleeve holds firmly and lets you reposition the bearing along the shaft, so processing plants, maintenance workshops and factories that want a mounting they can adjust without trouble rely on it.
Selection comes down to three things: shaft diameter, bearing type and how the equipment runs. Fit the sleeve with the correct tools and follow the maker's instructions so nothing gets damaged. A lubricated sleeve and nut are easier to adjust and easier to remove later. Check alignment, confirm the nut is tightened properly, and clean the contact surfaces before assembly; all three help the mounting stay secure over time.
Other manufacturers list adapter sleeves under similar designations, but dimensions and construction details can differ. Before substituting one, line up the technical specifications and talk to a specialist. Brands do not swap automatically; dimensional and functional compatibility decides it. The original sleeve code plus the code of the bearing it works with gives the clearest picture.
For a quote on SKF HS series adapter sleeves, send the code or size you need on WhatsApp or by email. Our team replies promptly, can point you to equivalents and helps you pick the right component for the application.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- How do I pick the right HS sleeve for my bearing?
- Start with the bearing you are mounting and its tapered bore diameter, then use the SKF compatibility table to find the matching sleeve. If it is not clear, send us the bearing code on WhatsApp and we will help you sort it out.
- What matters when I mount an adapter sleeve?
- Clean the shaft and the bearing bore first. Put a thin film of lubricant on the threads and the contact surfaces. Then tighten the nut with the correct tool, following the maker's recommendations, so the parts are not deformed or damaged.
- Will HS sleeves fit bearings from other brands?
- HS sleeves are made for SKF bearings with a tapered bore. Another brand may come close on dimensions, but compatibility is never universal. Check the technical specifications, and if you are unsure, send us your bearing code so we can review the alternative.