SKF 7204 BECBP angular contact ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Angular contact ball bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding SKF 7204 BECBP
- 72Series
- Angular contact ball bearings, 72 series. Series differ in outside diameter and width even when the bore is the same.
- 04Bore
- Bore 20 mm (04 × 5).
- BECBPSuffix
- SKF suffix: identifies the variant, such as seals or shields, cage, internal clearance or other features.
7204 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
SKF 7204 BECBP measures 20 mm across the bore and 47 mm across the outside diameter; its width is 14 mm (20 x 47 x 14 mm).
SKF 7204 BECBP belongs to angular contact ball bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 7204 BECBP and any equivalents.
The SKF 72 BECBP series covers single row angular contact ball bearings built to handle combined radial and axial loads in one direction. Their contact angle design suits setups that call for precision and rigidity.
The suffix tells you what you are holding. B is the 40° contact angle. E is a glass fibre reinforced polyamide cage. C is standard internal clearance for the series. The second B is a recess on the inner ring that simplifies mounting. P is normal tolerance. Bore sizes run across the series: the 7201 BECBP takes a 12 mm shaft, while the 7208 BECBP takes a 40 mm shaft. Reading the code this way speeds up identification on the floor.
These bearings fit equipment where radial and axial forces arrive together and precision matters: centrifugal pumps, compressors, machine tool spindles, gearboxes and transmission units. Because each bearing accepts axial load in only one direction, they are often mounted in opposed pairs so the arrangement covers both directions.
Selection comes down to the radial and axial load, the rotational speed, the internal clearance and the lubrication method. During mounting, alignment must be accurate and preload is often adjusted to achieve the required rigidity. The bearings are open; sealing depends on the working environment and can be handled with shield plates where needed. Grease or oil lubrication both apply. Keep the installation clean, since contamination shortens service life.
Interchange with other brands that use the same international designation is possible when dimensions and suffixes line up, but tolerances and internal clearance can differ between manufacturers, so confirm before substituting. For a replacement, send the complete part number from the original bearing or drawing. You can request a quote by part number through WhatsApp or email, and our team will reply promptly, suggest equivalents and help you choose.
Dimensions
20 x 47 x 14 mm (d x D x B): boundary dimensions for basic designation 7204, according to ISO 15.
- Bore
- 20mm
- Outside diameter (D)
- 47mm
- Width (B)
- 14mm
Same size, other brands
Other brands' pages with basic designation 7204: 20 x 47 x 14 mm (d x D x B) per ISO 15.
- FAG7204-B-XL-JP7204-B-XL-TVP7204-B-XL-2RS-TVP
- NSK7204 A7204 B7204 BEAT85 T7
- NTN72047204B7204C
- RKB7204
- TIMKEN7204 B
What they share are the ISO 15 boundary dimensions, not the specs: seals or shields, internal clearance, cage and load rating may vary with brand and suffix. Every quote is by full part number.
Frequently asked questions
- SKF 7204 BECBP bearing: what are its dimensions?
- SKF 7204 BECBP measures 20 mm across the bore and 47 mm across the outside diameter; its width is 14 mm (20 x 47 x 14 mm). Those are the boundary dimensions standardized in ISO 15 for basic designation 7204.
- What does the BECBP suffix mean on an SKF bearing?
- B is the 40° contact angle. E is a glass fibre reinforced polyamide cage. C is standard internal clearance for the series. The second B is a recess in the inner ring for easier mounting. P is normal tolerance.
- Do these bearings come with seals or shields?
- No, the BECBP designation covers open bearings. Sealed versions exist in the series under other suffixes, so ask us if your application needs sealing.
- How do I know if I can replace a bearing from another brand with this SKF one?
- Check that bore, outside diameter and width match, and that the design type is the same. International designations are usually equivalent, but tolerances and internal clearance can vary, so confirm with our team before replacing.