TIMKEN 7204 B angular contact ball bearing
- Brand
- TIMKEN
- Category
- Bearings
- Subcategory
- Angular contact ball bearings
- Series
- 7200 - 7300
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
NSK and TIMKEN: matching part numbers →NTN and TIMKEN: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding TIMKEN 7204 B
- 72Series
- Angular contact ball bearings, 72 series. Series differ in outside diameter and width even when the bore is the same.
- 04Bore
- Bore 20 mm (04 × 5).
- BSuffix
- TIMKEN suffix: identifies the variant, such as seals or shields, cage, internal clearance or other features.
7204 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
TIMKEN 7204 B measures 20 mm across the bore and 47 mm across the outside diameter; its width is 14 mm (20 x 47 x 14 mm).
TIMKEN 7204 B belongs to angular contact ball bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 7204 B and any equivalents.
When a shaft has to handle radial and axial forces at the same time, angular contact ball bearings are often the answer. The TIMKEN 7200 B series is built for that duty, with a 40° contact angle that suits machine tool spindles, pumps, compressors, gearboxes and similar equipment. MR Industrial Accessories supplies these bearings as part of its bearing range for plants and workshops in the United States and Latin America.
Reading the part number helps you order the right size. The 72 prefix identifies an angular contact ball bearing of the 7200 series, and the B suffix tells you the contact angle is 40° and indicates the cage design. The digits that follow the prefix reflect the bore: 7200 B, 7201 B, 7202 B, 7203 B, 7204 B, 7205 B, 7206 B and 7207 B go from smaller to larger bore diameters. That makes it easy to spot the main dimensions from the code alone.
Typical installations include machine tool spindles where rigidity matters, centrifugal and positive displacement pumps that see axial load, screw and reciprocating compressors, gearboxes and gear cases, and electric motors working under demanding conditions. You will also find them in power transmission equipment such as industrial fans and conveyors. Because they take combined loads, they help keep the shaft stable as operating conditions change.
Selection comes down to load size and direction, rotation speed and the surrounding environment. These bearings are sensitive to misalignment, so mounting needs precise alignment. They are usually installed in pairs, either back-to-back, face-to-face or tandem, to set the correct preload and share the load. Grease or oil lubrication can be used depending on the application, and keeping the bearing clean is essential. In dusty or humid areas, consider sealed or shielded versions for extra protection.
For replacement, other brands that follow the same international nomenclature can be used if the dimensions and contact angle match. Tolerances and internal clearance can differ from one manufacturer to another, so it pays to check them. The safest approach is to share the complete original part number with a specialist before installing. Our team can review the data and suggest a suitable equivalent.
To request a quote for TIMKEN 7200 B series angular contact bearings, send the part number or the size you need by WhatsApp or email. We reply promptly and can also help with selection and mounting questions so your equipment keeps running as intended.
Dimensions
20 x 47 x 14 mm (d x D x B): boundary dimensions for basic designation 7204, according to ISO 15.
- Bore
- 20 mm
- Outside diameter (D)
- 47mm
- Width (B)
- 14mm
SKF and other brands, same size
Other brands' pages with basic designation 7204: 20 x 47 x 14 mm (d x D x B) per ISO 15.
- Need the SKF 7204? We can also quote:7204 BEP7204 BECBJ7204 BECBM8 more →
- FAG7204-B-XL-JP7204-B-XL-TVP7204-B-XL-2RS-TVP
- NSK7204 A7204 B7204 BEAT85 T7
- NTN72047204B7204C
- RKB7204
What they share are the ISO 15 boundary dimensions, not the specs: seals or shields, internal clearance, cage and load rating may vary with brand and suffix. Every quote is by full part number.
Frequently asked questions
- TIMKEN 7204 B bearing: what are its dimensions?
- TIMKEN 7204 B measures 20 mm across the bore and 47 mm across the outside diameter; its width is 14 mm (20 x 47 x 14 mm). Those are the boundary dimensions standardized in ISO 15 for basic designation 7204.
- What does the B suffix mean in TIMKEN 7200 series bearings?
- The B indicates a 40° contact angle, which allows the bearing to carry axial loads in one direction. Keep that characteristic in mind when replacing it so the assembly performs as expected.
- How are angular contact bearings mounted?
- They are typically mounted in pairs, in back-to-back, face-to-face or tandem arrangement, to achieve the required preload and rigidity. Precise alignment and correct lubrication are critical for reliable operation.
- Can I replace a TIMKEN 7200 B bearing with another brand?
- Yes, if the other brand offers the same dimensions and contact angle. Check tolerances and internal clearance before installing. Send us the part number and we can advise on a suitable alternative.