SKF 6002-2RSH/W64F deep groove ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Deep groove ball bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding SKF 6002-2RSH/W64F
- 60Series
- Deep groove ball bearings, 60 series. Series differ in outside diameter and width even when the bore is the same.
- 02Bore
- Bore 15 mm: by standard, 02 designates 15 mm.
- 2RSH/W64FSuffix
- SKF suffix: identifies the variant, such as seals or shields, cage, internal clearance or other features.
6002 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
SKF 6002-2RSH/W64F measures 15 mm across the bore and 32 mm across the outside diameter; its width is 9 mm (15 x 32 x 9 mm).
SKF 6002-2RSH/W64F belongs to deep groove ball bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 6002-2RSH/W64F and any equivalents.
For equipment exposed to dust, moisture and moderate heat, SKF deep groove ball bearings with the 2RSH/W64F suffix combination offer a sealed, ready-to-install solution. The 2RSH designation covers nitrile contact seals on both sides, while W64F indicates a grease formulated for a wide temperature range. This makes the bearings a practical choice for continuous industrial duty where contamination control and reliable lubrication matter.
Reading the part number is straightforward. The basic series comes first, such as 6000 or 6200, followed by the suffixes. In a 6002-2RSH/W64F, the 60 series identifies the bearing size and load capacity, 2RSH means dual nitrile contact seals, and W64F specifies the wide-temperature grease fill. This code structure helps you confirm that a replacement matches the sealing and lubrication of the original.
Typical applications include electric motors, pumps, fans, conveyors and agricultural machinery. The contact seals keep grease in and contaminants out, so these bearings suit dusty, damp or moderately exposed locations. Food processing, textile, chemical and other continuous-process industries often select this series for equipment that runs for long periods.
Selection depends on load, speed and the operating environment. Because the 2RSH seals are factory-lubricated, no additional greasing is needed in service. Check that the working temperature stays within the range of the W64F grease. During mounting, align the shaft and housing carefully, avoid impacts that could damage the seals, and keep both surfaces clean to support service life.
For cross-reference, bearings with 2RSH and W64F suffixes can be compared with other brands that offer two-sided sealing and similar grease properties, such as 2RS or 2RS1. Always verify tolerances and internal clearance for the specific application. MR supplies SKF bearings and can suggest equivalents when a direct match is not available.
To request a quote, send the complete part number or the bearing dimensions by WhatsApp or email. Our team responds promptly and can help you confirm the right choice for your equipment.
Dimensions
15 x 32 x 9 mm (d x D x B): boundary dimensions for basic designation 6002, according to ISO 15.
- Bore
- 15mm
- Outside diameter (D)
- 32mm
- Width (B)
- 9mm
Same size, other brands
Other brands' pages with basic designation 6002: 15 x 32 x 9 mm (d x D x B) per ISO 15.
What they share are the ISO 15 boundary dimensions, not the specs: seals or shields, internal clearance, cage and load rating may vary with brand and suffix. Every quote is by full part number.
Frequently asked questions
- SKF 6002-2RSH/W64F bearing: what are its dimensions?
- SKF 6002-2RSH/W64F measures 15 mm across the bore and 32 mm across the outside diameter; its width is 9 mm (15 x 32 x 9 mm). Those are the boundary dimensions standardized in ISO 15 for basic designation 6002.
- What does the 2RSH suffix indicate on an SKF bearing?
- It identifies nitrile contact seals on both sides of the bearing. These seals retain the grease and block contaminants, which is useful in dirty or humid conditions.
- Why is W64F grease specified?
- W64F is a wide temperature range grease. It allows the bearing to operate where standard grease might not provide consistent lubrication under moderate thermal conditions.
- How can I get a quote for these bearings?
- Send the exact part number or the inner diameter, outer diameter and width by WhatsApp or email. We will reply with a quote and can suggest equivalents if needed.