SKF 6002-2RSH/LHT23 deep groove ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Deep groove ball bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding SKF 6002-2RSH/LHT23
- 60Series
- Deep groove ball bearings, 60 series. Series differ in outside diameter and width even when the bore is the same.
- 02Bore
- Bore 15 mm: by standard, 02 designates 15 mm.
- 2RSH/LHT23Suffix
- SKF suffix: identifies the variant, such as seals or shields, cage, internal clearance or other features.
6002 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
SKF 6002-2RSH/LHT23 measures 15 mm across the bore and 32 mm across the outside diameter; its width is 9 mm (15 x 32 x 9 mm).
SKF 6002-2RSH/LHT23 belongs to deep groove ball bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 6002-2RSH/LHT23 and any equivalents.
For equipment that runs hot and dirty, the SKF 6002-2RSH/LHT23 deep groove ball bearing offers a sealed solution with grease formulated for elevated temperatures. It handles moderate radial and axial loads, making it a common choice for electric motors, fans and pumps. The double contact seal keeps lubricant in and contaminants out, which helps in dusty or humid settings. MR Industrial Accessories LLC supplies this bearing and can help you confirm the right fit for your application.
The part number breaks down into three parts. The base number 6002 identifies a bearing in the 60 series, which has a thin cross-section and a small bore. The 2RSH suffix means there are rubber contact seals on both sides, so the bearing is protected against particles and moisture. The LHT23 extension points to a high-temperature grease with an extended range. When ordering a replacement, include all three elements to get the exact same configuration.
These bearings are found in low-power electric motors, centrifugal fans, small pumps, compressors and similar drive systems. They also appear in conveyors, machine tools and forced ventilation units. Because of the high-temperature grease, they suit ovens, dryers and processes where residual heat is present. The contact seals allow them to work in environments with dust, chips or humidity without losing lubrication.
Selection depends on matching the bore, outer diameter and width to the application. The RSH seal is a contact type, so it offers better protection than a non-contact seal, though it creates slightly more friction. Do not substitute the LHT23 grease with a standard grease, as it is specifically formulated for high temperatures. During mounting, align the housings carefully and avoid impacts that could deform the seals. In most cases, the bearing is lubricated for life.
SKF bearings in this series can be interchanged with equivalents from other manufacturers that share the same dimensions and seal type. The critical point is to keep the full part number, including suffixes, because a version without seals or with standard grease will not perform the same. If the original equipment uses a double-sealed bearing with high-temperature grease, choose a replacement with similar features. Always verify tolerances and internal clearance.
To get this bearing, send the complete part number to MR Industrial Accessories LLC via WhatsApp. The team can help you identify the exact part and answer questions about mounting or interchangeability. You can also request a quote with no obligation and receive personalized technical advice.
Dimensions
15 x 32 x 9 mm (d x D x B): boundary dimensions for basic designation 6002, according to ISO 15.
- Bore
- 15mm
- Outside diameter (D)
- 32mm
- Width (B)
- 9mm
Same size, other brands
Other brands' pages with basic designation 6002: 15 x 32 x 9 mm (d x D x B) per ISO 15.
What they share are the ISO 15 boundary dimensions, not the specs: seals or shields, internal clearance, cage and load rating may vary with brand and suffix. Every quote is by full part number.
Frequently asked questions
- SKF 6002-2RSH/LHT23 bearing: what are its dimensions?
- SKF 6002-2RSH/LHT23 measures 15 mm across the bore and 32 mm across the outside diameter; its width is 9 mm (15 x 32 x 9 mm). Those are the boundary dimensions standardized in ISO 15 for basic designation 6002.
- What does the RSH suffix indicate on an SKF bearing?
- RSH means the bearing has rubber contact seals on both sides. These seals keep grease in and block dust, water and particles, which helps extend service life in contaminated environments.
- What temperature range is the LHT23 grease suitable for?
- LHT23 is a high-temperature grease designed for applications where the bearing operates above conventional ranges. Contact us with the full part number to confirm compatibility with your equipment.
- Can I use a bearing from another brand as a replacement?
- Yes, if the dimensions and seal type match. It is important to maintain the suffixes that indicate double sealing and high-temperature grease. Send us the original part number and we will advise you on the equivalent.