SKF 38 VS V v-ring seal
- Brand
- SKF
- Category
- Seals
- Subcategory
- V-ring seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF 38 VS V belongs to v-ring seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 38 VS V and any equivalents.
The SKF VS V series V-ring is an axial shaft seal that rotates with the shaft and seals against a perpendicular face, typically the front of a bearing or housing. Its flexible lip keeps lubricant in and contaminants out, making it a practical choice for protecting bearings in dusty or wet environments.
The code for these seals follows a simple pattern: the shaft diameter in millimeters plus the profile designation. For instance, 14 VS V fits a 14 mm shaft, while 38 VS V is for a 38 mm shaft. The VS prefix identifies the V-ring category, and the suffix V denotes the standard lip profile. This series covers a broad range of shaft sizes, each matching its nominal diameter.
Common applications include conveyors, mixers, pumps, and gearboxes in industries such as food processing, cement, mining, and aggregates, where dust, moisture, or frequent washdowns can compromise bearing life. They are also suitable for fan shafts and agricultural equipment. MR supplies these seals for maintenance and replacement in demanding operating conditions.
When selecting a V-ring, confirm the shaft diameter and operating speed. The lip should contact the sealing face with slight interference; excessive contact causes heat and premature wear. The mating surface must be smooth and perpendicular to the shaft. During installation, apply compatible grease to the lip and avoid damage from sharp edges. Proper alignment between shaft and housing extends seal and bearing life.
SKF VS V series seals can often replace seals from other brands with the same dimensional designation, provided the shaft diameter and lip profile match. Not all profiles are equivalent, so verify lip angle and flexibility for your application. Contact our technical team if you need help confirming compatibility.
For a quote, send the complete seal code (e.g., 20 VS V) and quantity via WhatsApp or email. Our team can suggest alternatives and help you choose the right V-ring for your equipment.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- How do I determine the right V-ring size?
- Measure the shaft diameter where the seal will be mounted. The designation includes that diameter in millimeters, such as 20 VS V for a 20 mm shaft. Also consider speed and available space for the lip.
- What distinguishes a V-ring from a standard radial shaft seal?
- A V-ring seals axially against a face perpendicular to the shaft and rotates with it, while a radial shaft seal seals radially against the shaft. V-rings tolerate misalignment better and are easier to install, but they are not designed for pressure applications.
- Can SKF VS V series V-rings replace seals from other manufacturers?
- Yes, if the shaft diameter and lip profile are the same. Many suppliers use similar dimensional codes, but always verify lip angle and flexibility before substituting.