SKF 22214 EK/C3 spherical roller bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Spherical roller bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding SKF 22214 EK/C3
- 222Series
- Spherical roller bearings, 222 series. Series differ in outside diameter and width even when the bore is the same.
- 14Bore
- Bore 70 mm (14 × 5).
- EK/C3Suffix
- SKF suffix: identifies the variant, such as seals or shields, cage, internal clearance or other features.
22214 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
SKF 22214 EK/C3 measures 70 mm across the bore and 125 mm across the outside diameter; its width is 31 mm (70 x 125 x 31 mm).
SKF 22214 EK/C3 belongs to spherical roller bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 22214 EK/C3 and any equivalents.
SKF spherical roller bearings handle combined radial and axial loads while tolerating shaft misalignment. Two rows of rollers run on a spherical outer raceway, so the shaft can deflect without adding stress inside the bearing. This makes them a practical choice for equipment where perfect alignment is difficult to maintain.
The part number tells you what you are getting. In the 222 series, the first digit identifies the bearing type, the second gives the width, and the final two digits indicate the bore diameter. Look at the suffixes: EK means a tapered bore with a 1:12 taper for an adapter sleeve, while C3 and C4 indicate internal radial clearance above normal. For instance, 22205 EK/C3 combines a tapered bore with C3 clearance, and 22209 EK/C4 has the looser C4 clearance. Reading these suffixes correctly is essential when ordering a replacement.
These bearings appear in cement, mining, steel, paper, and aggregate processing. Typical equipment includes conveyors, mills, vibrating screens, gearboxes, crushers, industrial fans, and large pumps. Misalignment tolerance suits long shafts and frames that may deform under load.
Selection depends on radial and axial load, speed, and mounting method. A tapered bore requires an adapter sleeve and lock nut, and you set internal clearance by measuring radial clearance reduction with feeler gauges. Grease or oil lubrication works, and seals should match the environment; dirty conditions call for sealed variants. Align carefully at installation, even though the bearing tolerates some misalignment afterward.
SKF spherical roller bearings interchange with other brands that follow the same dimensional designation, including FAG, NSK, NTN, and Timken. Always check clearance and bore suffixes, since they can differ between manufacturers. The 222 series covers most general applications; wider series are available for higher loads. Contact us if you need help identifying a replacement.
If you have the bearing part number, send it by WhatsApp or email to MR Industrial Accessories and we will quote promptly. We can also help you define the clearance suffix or bore type for your application. Our team can suggest equivalents and assist with selection.
Dimensions
70 x 125 x 31 mm (d x D x B): boundary dimensions for basic designation 22214, according to ISO 15.
- Bore
- 70mm
- Outside diameter (D)
- 125mm
- Width (B)
- 31mm
Same size, other brands
Other brands' pages with basic designation 22214: 70 x 125 x 31 mm (d x D x B) per ISO 15.
- FAG22214-E1-XL22214-E1-XL-K
- LINK-BELT22214LB22214LBK22214LBC31 more →
- NSK22214EAE422214EAKE4
- NTN22214EAD122214EMD122214EAKD11 more →
- RKB22214
- TIMKEN22214EJ22214EM
What they share are the ISO 15 boundary dimensions, not the specs: seals or shields, internal clearance, cage and load rating may vary with brand and suffix. Every quote is by full part number.
Frequently asked questions
- SKF 22214 EK/C3 bearing: what are its dimensions?
- SKF 22214 EK/C3 measures 70 mm across the bore and 125 mm across the outside diameter; its width is 31 mm (70 x 125 x 31 mm). Those are the boundary dimensions standardized in ISO 15 for basic designation 22214.
- What does the EK suffix mean on an SKF bearing?
- EK indicates a tapered bore with a 1:12 taper. This allows mounting on an adapter sleeve, and you adjust internal radial clearance with a lock nut. It is common where simpler mounting is needed or shaft tolerances must be compensated for.
- How do I choose between C3 and C4 clearance?
- C3 clearance is greater than normal and suits interference fits or high temperatures. C4 is even looser and is reserved for more severe conditions such as high temperatures or speeds. The choice depends on mounting and operating conditions; consult us if you have doubts.
- Are they interchangeable with other brands?
- Yes, SKF spherical roller bearings interchange with other brands that share the same dimensional designation, such as FAG, NSK, or NTN. However, verify the clearance and bore suffixes, because they may differ. It is always advisable to confirm dimensions and tolerances before replacing.