SKF 22214 E spherical roller bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Spherical roller bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding SKF 22214 E
- 222Series
- Spherical roller bearings, 222 series. Series differ in outside diameter and width even when the bore is the same.
- 14Bore
- Bore 70 mm (14 × 5).
- ESuffix
- SKF suffix: identifies the variant, such as seals or shields, cage, internal clearance or other features.
22214 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
SKF 22214 E measures 70 mm across the bore and 125 mm across the outside diameter; its width is 31 mm (70 x 125 x 31 mm).
SKF 22214 E belongs to spherical roller bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 22214 E and any equivalents.
Spherical roller bearings in the SKF E series are self-aligning units built with two rows of rollers running on a spherical raceway in the outer ring. That geometry lets them carry heavy radial loads together with axial loads in either direction, and it absorbs angular misalignment between shaft and housing. They suit equipment where shaft deflection or mounting inaccuracy would otherwise be a problem.
Reading the designation is the fastest way to narrow down a replacement. The basic number, for example 22205, 22206 or 22208, sets the size and dimension series. The E suffix marks an optimized design with greater load capacity than earlier versions. A code such as 22205/20 E points to a variant with a special bore diameter. With those three elements identified, the bearing is easy to match.
These bearings show up in mining, cement, steel and material handling operations, as well as in conveyors, mills, crushers and road machinery, where loads are heavy and conditions are demanding. Their self-aligning behavior is an advantage on long shafts that flex under load, or in assemblies where housings cannot be aligned perfectly.
Selection comes down to the radial and axial load the position must carry, the rotational speed and the shaft diameter. The E suffix leaves the external dimensions unchanged but affects load capacity. At mounting, apply proper lubrication and verify internal clearance, since too tight a fit shortens service life. Initial alignment matters less than with other bearing types, though it is still worth checking to avoid added stress.
Designations are not always interchangeable between manufacturers. A bearing with the same basic number from a different brand may carry a different load capacity, so confirm the critical dimensions and operating conditions before substituting. MR Industrial Accessories LLC supplies SKF as a brand, and our team can point you to the right option when you send the code and the working conditions.
Dimensions
70 x 125 x 31 mm (d x D x B): boundary dimensions for basic designation 22214, according to ISO 15.
- Bore
- 70mm
- Outside diameter (D)
- 125mm
- Width (B)
- 31mm
Same size, other brands
Other brands' pages with basic designation 22214: 70 x 125 x 31 mm (d x D x B) per ISO 15.
- FAG22214-E1-XL22214-E1-XL-K
- LINK-BELT22214LB22214LBK22214LBC31 more →
- NSK22214EAE422214EAKE4
- NTN22214EAD122214EMD122214EAKD11 more →
- RKB22214
- TIMKEN22214EJ22214EM
What they share are the ISO 15 boundary dimensions, not the specs: seals or shields, internal clearance, cage and load rating may vary with brand and suffix. Every quote is by full part number.
Frequently asked questions
- SKF 22214 E bearing: what are its dimensions?
- SKF 22214 E measures 70 mm across the bore and 125 mm across the outside diameter; its width is 31 mm (70 x 125 x 31 mm). Those are the boundary dimensions standardized in ISO 15 for basic designation 22214.
- What does the E suffix indicate on an SKF bearing?
- It identifies an optimized design with higher radial and axial load capacity. External dimensions stay the same, but performance changes. The suffix appears across spherical roller bearings in the 222 series and others.
- How do I decide between a 22205 E and a 22205/20 E?
- The bore diameter separates them. The 22205 E uses a standard bore, while the 22205/20 E has a special bore of 20 mm. Confirm the shaft size before choosing.
- Which applications call for SKF E series spherical roller bearings?
- Equipment that combines heavy loads with misalignment, such as conveyor belts, mills, crushers and road machinery. The self-aligning design works well on flexible shafts and in demanding assemblies.