Coupling RUADIGON X-1 (X-20) — Coupling with solid hubs
- Brand
- RUADIGON
- Category
- Power transmission
- Subcategory
- Couplings
- Series
- X
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
RUADIGON X-1 · Acople con mazas llenas belongs to coupling, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for X-1 · Acople con mazas llenas and any equivalents.
The RUADIGON X-1 is a shaft coupling with solid hubs, a power transmission part used to link a driver and a driven shaft while absorbing misalignment. It is also referenced as X-20, so either code works when you need to identify or replace it. MR Industrial Accessories LLC supplies this coupling within its power transmission range and can review your application data to confirm the right version.
The X-1 designation and the X-20 equivalence are the two references to keep on hand when ordering or cross-referencing this coupling. Solid hubs mean the hubs are made without lightening, which suits installations where a more rigid connection is preferred and the available space is not a constraint. If your documentation shows X-20, the X-1 is the matching item.
Typical duty covers low and medium speed drives such as pumps, fans, conveyors, mixers and machine tools. The coupling also appears in process equipment where a small amount of misalignment has to be taken up without passing vibration along the motor shaft. Selection comes down to torque, rpm and shaft diameter, so have those figures ready when you ask for a quote.
During installation, check that both shafts are clean and free of burrs and that the key seats without play. The coupling should slide on without hammering; if it has to be forced, recheck the measurements. Alignment at this stage matters because it keeps the flexible element working inside its range, and misalignment beyond that range reduces service life. If the equipment data sheet is missing, a photo of the old coupling plus the shaft dimensions is usually enough for us to identify the correct version.
Equivalents within the same X series can also be reviewed. Send the original code, shaft diameter, working torque and rpm, and we will go through the RUADIGON options we supply. We can also help when the coupling is fitted to a gearbox or to a standard electric motor.
Dimensions
- Model
- X-1
- Equivalent to
- X-20
- Component
- Coupling with solid hubs
Frequently asked questions
- Do the X-1 and X-20 codes refer to the same coupling?
- Yes. The X-1 is equivalent to the X-20: same coupling with solid hubs, different commercial designation. If your equipment lists X-20, you can order X-1, and the other way around. Confirm with the full code before requesting a quote.
- What does a solid hub design involve?
- The hubs are produced solid, without lightening. That gives a more rigid coupling with higher torque transmission capacity, and it adds weight. It is the usual choice when robustness comes first and mounting space is not limited.
- How can I get a quote for this coupling?
- Send the X-1 or X-20 code by WhatsApp or email to MR Industrial Accessories LLC. If possible, include shaft dimensions, torque and rpm of the equipment. With that information we will quote it and, if needed, look for an alternative in the same series.