V-belt Optibelt XPZ 3550
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- XPZ
- Series
- Super X-Power M=S
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT XPZ 3550 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for XPZ 3550 and any equivalents.
This Optibelt Super X-Power M=S belt is a cogged narrow V-belt in the XPZ profile with a length of 3550 mm. For a maintenance or purchasing professional, those two values are the starting point: the profile sets the groove width the belt must sit in, and the length sets the center distance it will span on the drive.
The XPZ profile is a narrow wedge section, so it is built for drives where a standard classical V-belt would be wider than the pulley grooves allow. The cogged construction is the raw-edge type with a molded tooth pattern on the underside, which is common on compact drives running over smaller pulleys. Confirm the profile against the old belt or the pulley groove before ordering.
The 3550 mm length is the datum to match. Read it off the back of the belt you are replacing, along with the profile marking, and compare it with the pulley positions on the drive. If the drive runs more than one belt, replace the full set at the same time so the load stays shared evenly across the grooves.
The same size is also listed under Gates XPZ 3550. Send the part number, the profile and the length by WhatsApp or email and our team will confirm the belt or suggest an equivalent.
Dimensions
- Section
- XPZ
- Length
- 3550mm
Frequently asked questions
- What do the XPZ profile and 3550 mm length tell me?
- XPZ is the narrow wedge profile, and 3550 mm is the length. Both values must match the drive: the profile fits the pulley groove and the length sets the center distance.
- How do I confirm this is the right belt for my drive?
- Read the marking on the back of the old belt and compare the profile and length with this one. If the drive uses several belts, replace them as a set.
- What should I send to request a quote?
- Send the part number XPZ 3550, the profile, the length and the quantity you need by WhatsApp or email. Our team will reply and help confirm the right belt.