V-belt Optibelt XPZ 3350
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- XPZ
- Series
- Super X-Power M=S
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT XPZ 3350 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for XPZ 3350 and any equivalents.
The Optibelt XPZ 3350 is a cogged narrow V-belt from the Super X-Power M=S series. It is built for compact, high-speed industrial drives where a standard V-belt would be too wide or too stiff to run efficiently.
Cogged narrow V-belts like this XPZ profile are common on pumps, fans, compressors, machine tools and similar equipment. The cogged underside improves flexibility around small pulleys, which helps the belt run cooler and grip reliably on demanding drives.
To confirm fit, check the belt marking on the back of the old belt and match the profile and length. This belt is XPZ with a length of 3350 mm. If the old belt is worn or the marking is unreadable, measure the outside length and the top width, and note the pulley diameters and groove count.
The same size is also listed under Gates XPZ 3350. If you are replacing a belt on a multi-belt drive, inspect all pulleys for wear and alignment, and replace the full set so the load is shared evenly.
Dimensions
- Section
- XPZ
- Length
- 3350mm
Frequently asked questions
- How do I confirm this XPZ 3350 belt fits my drive?
- Read the marking on the back of the old belt. It should show the profile and length, such as XPZ 3350. Also check that the pulley grooves match the XPZ profile and that the belt length matches the drive's required length.
- Can I replace just one belt on a multi-belt drive?
- It is best to replace all belts in the set at the same time. Mixing new and worn belts can cause uneven tension and premature failure. Inspect the pulleys for wear or misalignment before installing the new set.
- What information should I send to request a quote?
- Send the part number, XPZ 3350, and the quantity you need. If you are unsure about the profile or length, include the old belt marking, the pulley diameters and the number of grooves.